Does your machine have an inverter/drive motor or a auxiliary brush motor? You can call me if needed.
While I haven't opened such a gear, I'll suggest you a few points as below.
1) Make sure you have unscrewed all grub screws and locking...
Where are you located in India?
Can you tell me the exact machine model?
Is it L225BP?
Reach out to me via private message.
No new Akiyama installations here in my knowledge.
But used Akiyamas are still being imported and run over here.
These are paper sizes.
B1 format presses can handle a max paper size of B1 format and are usually 28' x40' inches in size.
B2 format presses are...
The issue is most likely with your scanner drivers. Try updating the drivers.
If it's still not working then uninstall the scanner software, clear...
Cut off the ink, put the damp rollers on a blank plate and pass the paper to let it swell.
Then start printing from second pass onwards.
Thanks Meny and Aqazi81 :).
But I won't get a Dahlgren in the 1987 Lithrone, can I?
So, there are two types of dampening systems
possible in the 1987-88 L440.
First is the conventional one, having molleton
Can anyone enlighten me about the dampening type(s) (non-Conventional) to be expected in a 1987-88 Komori L440 (no plate cocking)?...
When I said varnish, I meant INK DUCT Emulsion, no doubt that's the best available solution.
However, the aqueous coating solution is quite thin...
Hi, Many thanks for the reply.
I'm planning to run the aqueous coating through the water train so it hits a blank plate and then reaches the...
As per my knowledge, I can do spot varnish using the ink duct and a PS plate, just like printing an additional colour with varnish as...
A high resolution plate (2400 dpi+ is required for 1pt font) is all you need.