Ah.. I see.. Glad the machine is back on line.
Hi 654 means encoder pulses missing. If the SAP is OK (best way to check is, move it to another machine) you have to check the encoder
Already done. They don't have this as a spare part. They want us to buy whole doser unit which is much expensive, just for a little diaphragm.
Hi all Is there any place to buy this diaphragm in Technotrans aquados dosing unit? Photos attached. Thanks in advance.
Hi The flashing dot means "the cutting cycle not completed". Check the clamp sensor (remove the plastic band over the cutter frame and there is a...
Hi Remove the guard under the front table and There is a card called WSP. Pull it out and put back in firmly. this is what happens when you pull...
Hi Auto wash what? Roll? Blanket? Impression cylinder? There should be. But may be they have removed when you buy it. Who knows... See whether the...
Hi According to your description, I too feel that, before checking the brake itself, you should check the power transistor (most of the times...
Hi It should actually be read as "SET". there is a microswitch under the table and it's the 500.00mm mark. Check that switch. You can see it's...
Hi An error Code like 970 is impossible in the EM machines. There should be 2 digit code in the rightmost display. Even in ED, there is no such...
Hi Pleasure to hear you solved the problem. What happened to the transistor? Definitely it wasn't a short, right? You were so lucky, because it...
Hi Let me tell you my experience. You have an EMC I, which is very old. First, in this model, although the power supply board is 2A, you should...
Hi all Does anybody has the documents for the French paper cutter called Muro Goodhale? It's also known as FL22. the computer system named...
Hi all I need a small help from you. Do anybody still using this model (Wohlenberg Programmatic FFM 115)? If you do, there is a electronic board...
Thanks Mathew, After emergency stopping, in the errors screen, there were 2 more errors. "Flow control D-cycle" and "limit value alcohol". I first...
Thanks for the quick reply. Yes, there is an intermediate tank. Unfortunately the level switch was broken, so for the time being, we have...
Hello, I recently got an issue with an air cooled Technotrans beta.d 60L. The problem is that, it's randomly throws out an error "emergency stop...
Hello guys. This is the PA back panel / motherboard of the Wohlenberg MCS-2 system 85 model cutter. Can anybody know which chip goes to the...
Hi Charith I can do like this. Let me know If you're interested. [ATTACH] [ATTACH]
You have 2 possible methods. Should work one or the other. Method 1: press the heidelberg button on the filter card underneath together wit the...
