Hello, some questions.. The clamp do not move pushing the pedal ? The clamp do not move with cut buttons? The knife move puhsing the cut buttons?...
thank you
Hello, the machine was reset and the 33 error disappear. Now we have the issue: by manual positioning the backgauge stop correctly in the measure...
Thank you Sir...
Hello, Try to check the microswitchs related with the cams, the correct adjusting of them and the complete wire between cams microswitchs and the...
Hello, in this case the inverter Lenze was changed due a failure. The new one needs to be adapted to this machine section via parameters. But the...
The machine everytime stops in differents positions but the encoder was changed two years ago because in this moment the machine give a error code...
Hello, the failure was corrected. The encoder was dismounted to check in laboratory. Then, at the time to mounting the position wasn't the...
Hello Chock, thank you for your reply. I will keep you informed about the evolution of polar 78 after the next visit which will be next week. Now...
Hello, talking about a 78 ES. Innitially the display become brighter making difficult to read. To compense the backlight intensity was graduated...
I have done the reset of the maintenance counter, but I will try again and report my results. Thank you in advance.
I have the same issue. Polar 115ED.
Dear Sirs. This machine constantly give this two errors just turning on. Sometimes the first of them sometimes the second of them. The operator...
Hello Chock, I'm from Venezuela like you saw in perfil, Here we have a new wave increasing the levels of people contaminated and thtis week we...
[ATTACH] [ATTACH] [ATTACH]
Hello Chock, taking about Polar 82, with white valve box. Recently I found a touble in a Polar 82. Turning on the machine it begins to cut and...
hello eng reda Than you, I have done the next: " after reading below diagonosis , check the haydraulic system (y27 = 38 ohmi ,y33 = 38...
Hello, when press the cut buttons no actions occur, only appears 118 error and inmediatly 132 error appears. the light barrier show the test...
