First of all you have to check your rollers condition, and adjust them as recommend by your manual.
Then use a good quality of fountain...
Sorry, but I cannot understand your question.
I used the same way as mrheidelberg said, you can also use a short 6mm Allen key behind the pin and push it back.
Dear old school,
Ink up your rollers with light color, your vibrator in OFF position, then look carefully at the vibrator roller (from above) and...
IPA alcohol dose 6-9%.
Dampening solution dose 2-4% (the percentage is written in the product).
But at least, you have to buy...
Turning the screw clockwise increases the pressure between rollers, and vice versa.
And as Mr.Beguin mentioned it would be better to...
I guess you are asking about the dampening distributor roller, if yes.
You have to adjust the dampening form roller against this...
You have to pay a great attention to the blasr air at the delivery area.
Sometimes, too much air cause a high fluctuation in the sheet...
Can you tell us what is your machine type, and is it for the transfer cylinder or for the delivery drum?
Thayanithi is right, new versions are SX, there aren't new SM any more.
If you want to adjust the Intermediate rollers at machines with newest softwares you have to run the machine for a while first, then...
Is your machine SM102-4 full automatic perfector?
As Quig said, it might be that your suction air at the feeder suction tape is insufficient.
Did you check the 3 blowers, behind the...
SM52 is suitable for commercial printing and cardboard as well.
And there are SM52 machines with an option that you can print up to...
I think that the ideal temperature should be around 23c°.
Did you solve your problem?
There are many things that you have to check at preset plus feeder.
First, check if there is any wear in the tooth belts. Or pulleys for...
For me all the points that Junker mentioned are very important.
But I need some more information.
Try to print at your first unit...
I guess you have a Standard Feeder, not Pre-set?
For me I prefer the 6+coater, to avoid the expensive costs if any problems with happened at the perfector.
But if I were you, I will go...