Search Results

Search Again
  1. synthology
    Post

    Polar 115MON clamping problem

    [ATTACH]
    Post by: synthology, Nov 15, 2020 in forum: Cutters and Trimmers
  2. synthology
    Post

    Polar 115MON clamping problem

    Lack valve Y315 does not receive 42VDC. Check 42-VDC supply voltag
    Post by: synthology, Nov 12, 2020 in forum: Cutters and Trimmers
  3. synthology
    Post

    Question on Polar 76EM

    [ATTACH]
    Post by: synthology, Oct 5, 2020 in forum: Cutters and Trimmers
  4. synthology
    Post

    Mohr 66 Reference Position Error

    Error No.: 656 Error Text: REFERENCE POSITION ERROR State: ERROR Cause: The actual position loaded into the control counter when the reference...
    Post by: synthology, Aug 14, 2020 in forum: Cutters and Trimmers
  5. synthology
    Post

    Polar 92

    Error No.: 1142 Error Text: SAFTY CHECK REQUIRED ! State: ERROR Cause: As soon as the preset inspection date has been reached or failed to meet,...
    Post by: synthology, Jul 29, 2020 in forum: Cutters and Trimmers
  6. synthology
    Post

    Books cut in polar *need advice*

    There are two fundamental things which must be observed when cutting bound material. When performing a top and bottom cut it is essential that the...
    Post by: synthology, May 13, 2020 in forum: Cutters and Trimmers
  7. synthology
    Post

    Polar 115 EMC year of production 78

    Dear Chock As you can see down polar.pdf 115 EMC from 1978 it is CE or EMC1 . Picture from Sebastian IMG 024.jpg shows card 4a, because tab 1 2 3...
    Post by: synthology, Feb 22, 2020 in forum: Cutters and Trimmers
  8. synthology
    Post

    Polar 115 EMC year of production 78

    maybe this can be helpful good lock
    Post by: synthology, Feb 21, 2020 in forum: Cutters and Trimmers
  9. synthology
    Post

    Relocating Polar 90

    yes if you know how to put back
    Post by: synthology, Oct 27, 2019 in forum: Cutters and Trimmers
  10. synthology
    Post

    POLAR 76 EM ERROR 56

    [ATTACH] this may be help
    Post by: synthology, Oct 25, 2019 in forum: Cutters and Trimmers
  11. synthology
    Post

    Polar 176ED getting error codes 654, 608, 78 and 701

    I think it is time to call service 701 Error Text: WRONG BACKGAUGE DIRECTION ! State: ERROR Cause: The counting pulses expected from the...
    Post by: synthology, Oct 14, 2019 in forum: Cutters and Trimmers
  12. synthology
    Post

    Polar 92 emc 47 ohm resistor sizing

    Wattage is 1 watt and I do not think it has any connection with " lower than normal voltage everywhere " , check incoming voltage to cutter and...
    Post by: synthology, Oct 4, 2019 in forum: Cutters and Trimmers
Showing results 1 to 12 of 12
Search Again