all parts is the same PM and SM?
having problem with uneven print parallel to cylinder.
ghosting or double image can be seen in the center only .
what could be the culprit?
from what i understand the two arrows pointing to the 2 screws is normally connected.
when plunger is down it should...
can i put epoxy to fill the hole?
yes sir junker, it is without cp tronics. please see 2 images..
1st image i found a hole in the plunger. it got stuck up.
guys need help with impression problem.
sometimes 2 to 4 unit will not engage. only 1st unit will engage impression.
how can i fix this?
is it this one?
hi sir junker, where can i find the roller switch?
you have reference picture?
if electrical problem i need to call electrician.
Please help. Counter sometimes run. Sometimes stop.
How do i fix this? What triggers the counter to run?
ink film strips?
how do i properly adjust alcolor dampening rollers?
guys before getting the machine.
the set zero button for the registration still works
now all of a sudden it wont work anymore. tried changing...
thank you for this
NLGI is just an agency that sets standards for grease compositions, 000 is the consistency rating, this one being on the more...
sir junker, what do you mean by OS cover?
thanks for the input junker and contractor.
the label indicate i should use fluid grease of NLGI-class 000 or 00!, not really sure what this is....
what kind of oil of fluid grease should i use for the central lubricating of heidelberg mov.
thanks for this info. will have to check drive side. hope to find that sensor..
how about the crawl? it should stop after reaching the end of plate..
how to i fix it? any suggestion?
sir, thanks for that info.
will check if there is a click if rotating the screws. your right there is an o ring at the end of the screws....