Sorry, NTK is in the left hand side
Swap between the SSK2 'S which shown in the picture,
The right hand side one is the power supply (NTK), you can replace it with one...
SSK2 boards located at the bottom of the main cabinet
In your machine you have two SSK2 boards, you can swap
What is the problem appearing on the screen?
If you recently changef these boards, please swap the EPROM's between old and new boards
There is a position switch seeing that the coating unit is at its home position, you can find it in the operating side beside the lifting air...
All information is clear in google play app inormation and photos in the application App Guide,
You have to register with your reachable email...
After 30 times of support you have to pay 1$ to add 50 extra times
Hello Mathew, he is not the conversation starter, I get confused is it another machine?
ZSK X11 pin 9+10 jumber, pin 11+12 jumber
Make basic initialization to ZSK board
Can any one tried this app, if any problems using it?
So good to hear that your problem been solved, congratulations
Watch the LED once you pressed Compressor ON, it should goes OFF
There is a red LED on the KLM board, it should be ON after machen power ON, then it should go OFF when you make paper ON,
Please test the blower...
First check the grease pump (under the grease container) at delivery DS (drive side), it should start turning after the machine startup...
One gaurd switch is not working properly, I think it is the delevery glass gaurd.
Try to open all machine gaurds one by one and watch the...
Did you check the KLM4 in another machine, may the board you tested is also faulty.
First, replace the flat cable from SSR to RER (at the left side of the back side of the boards wall) usually it makes the problem.
I replied to the issue creator, it is not my machine.
Second thing, SM74-5+L MUST has CPTronic modular system not Compact.