Hey thanks. Yes it was a hole in the line that I overlooked. Thanks for the advice.
Hello I am having an issue with sheet separation. Side air works fine, I'm not getting air to the sheet separator or the foot. I pulled the hose...
I'm running a cd102 with a grafix heater cassette. How do I get the cassette out to replace a couple heating coils?
Model is beta.c 270 SC
We jiggles some wires and removed a nd replaced the battery. Seems to be working just fine now.
Illegal reset- condition
Says press any key to restart but nothing happens after key press.
Everything is working fine now. Seems to be valve's stuck open. I came back the next day. Plugged everything back up and it worked just fine.
The compressor seems to be working. It builds pressure. When released to the press it quickly loses pressure. There are no leaks except the valve...
The problem is that the chain lube wont pump when needed and it beeps continuously while running.
We think we've narrowed it down to VSM...
We have to replace a motor and potentiometer. Is the a specific way to do this or can I get directions to an install sheet for both?
Ok thanks. I will check that out. For now we have installed a potentiometer to bypass the sensor.
Getting a red light showing insufficient pressure. Compressor is ok. For some reason the sensor is not allowing the valve to open.
Hey I'm running a Heidelberg sm 52. Ever so often when I start feeding paper I will hear a clunk sound as it gets ready to feed. Trying to figure...