the problem was due to a broken ribbon cable.
hello dear elder, could someone tell me the safety features linked to the contactor (d1) in the electrical cabinet on GTO -2 thank you for your...
Hi, I want to thank you I was able to find the failure. God bless us thank you.
it is the margin alone which does not display when you press the emergency stop button. see the video thank you
hi dear elder, what you had recommended we had done but it is always seems thank you.
I have changed the SEK card but it's the same.
Hi CALE and thank you.
In DYN test and INIT test SEK does not show what this is due to.
hi dear elder, To what may this be due.SEK
hi dear elder, just a problem with turnaround. any suggestions will be welcome thank you
thank you to all, it is the powder which was in return with the feeder.
hi, it's on all heads.
hello dear elder chock, we did what you recommended but still seems. empty passage with paper without printing the feeder does not stop but when...
I forgot to point out that when the machine runs empty with the feeder for at least 10mn to 20mn it does not stop but when we go to production...
hi dear elder, a problem with SM102-4. when the machine is in printing after passing 80 sheets the machine stops and does not mark anything on the...
there is a jar at the CE margin which contains light grease. change the grease and put the grease for lubrication. if you do not have any, mix the...
problem with my sm102-4.When the machine is printing after 65 sheets the margin stops and the machine still runs and does not indicate a fault to...
I was able to find the solution to my withdrawal problem. It is a card which was the cause. Thank you
the cable that leaves in the electrical cabinet is plugged in at the bottom. take the one that leaves in the cabinet and connect it to the motor see.
the problem must be in the cable, unplug the cable that goes to the motor, unplug it at the bottom too and take the one that connects to the...
Please see the picture dampening motor