Search results

Reseller founded!

You can do 4-color jobs with GTO, but not with pm46-2. I have 1c Gto 46 with kompac for special jobs: numbering, cutting etc +quickmaster 46-4 for 4 color prints. A good combination.

Hi, Here is two Xerox for quickly sale: One is 260, service contract still on http://www.kuvanettiin.fi/di/XQLL/x260.jpg printcount later, moderatly creo or efi fiery, must check that 4300 eur. BW 360.000 4C 700.000 Other is 250 with oversize feeder and finisher over 1m printed you can...

Did that work?

Thanks adriansto for trying to help me.

It´s a external fiery

Efi fiery 6 hard disk failure, can´t start. I dont´t have dvd/dongle/clone for this. Any suggest what to do now? Of course I have to do quick jobs now. Should I buy cheap copier and then search a new rip. Is it possible to download rip program via web to the new hard disk? Many...

I didn´t check that mentioned before, but check vacuum hose also. Mine was so old and brittle that it leaked.

Change NVM 744 350 =>0 Google error code and you will find better instructions.

Take off waste toner container, can you spot 0,2x0,2 inch size sensorwindow and that could be too dirty. It is located 5 inch from the door, it´s the black plastic thing. You can test printer without wastetoner container. Let the container door be open, shut the big door only. Then use "stick...

Open the side cover and check that the vacuum hose not leaking. Do it feed correctly and constant when idling?

If not familier with offset press, it´s maybe possible to hire QMDI teacher from this forum (and highly recomended). This machine needs mechanically talented user. Learning takes a couple of months. I read qmdi´s forums a couple years before I bought my machine. So far so good, I´m happy...

Like xfactor printing adviced, check first ROS window not ROS mirrow, with flashlight with some mirrow, no compressed air. Do like xfactor told to do, it´s really the easiest way.

Try rc hobby store, there could be thin wood veneer for rc planes. If you need more, then from basic wood store.

Inch below wastetoner´s gearwheel, you can push it with ~20 inch long stick. Use flashlight, then you see the switch.

Disassembling QMDI Classic, if you need cheap frame/helicoils/motors and basic parts act quickly. Parts under 30m printed. mail:tchriste_2000@yahoo.com Disassembling will happen on wednesday (9th jan.)

Sometimes it could be bad firewire connection from network controller. In my case error was at the first time power supply didn´t work. I changed power from pc computer and it worked again. Later, second and the last error was caused by harddisk failure. I tryed even to freeze hd, but...

You can throw LCD instead, just like that.

NotAGooner, I disconnected all wires and connect like I used to and now, looks that issue solved.

Hi, Here´s confusing pages: http://kuvaton.com/k/YLJK.jpg Left side is OK, I have original wires and orig. 50-12 power supply. But problem is right side, I don´t have orig. wiring for that, so can´t be sure about how to connect. The biggest confusing is GND, is it +12v or -12v? If...