Search results

  1. Manroland 200 impression timing problem

    Positioning tools are used between the two sides, A and B. The pressure OFF process is determined by the eccentrics and is not described for obvious reasons.

  2. Manroland 200 impression timing problem

    There is a scale on the foregrapper axis. If it is missing, please. I recommend you use tool 1, = 242,488mm, 356.5degr.

  3. Manroland 200 impression timing problem

    It is also possible that the problem is in the cable that powers the electromagnet. It has happened many times. Turn on the pressure and move the cable. You will understand if the problem is there. If it is there, pull the cable and cut off the damaged part. There is an advance.

  4. MR306 CFM usage?

    Roland is a German machine. In Germany it is not measured in fingers, palms, feet, etc. There they measure in meters. Depending on the series of the machine and the number of PUs, it is between 330 and 950 l/m at 9-11 Bar If you give me a Telegram number, I will send you all the documentation...

  5. MR306 CFM usage?

    Normally the R304 works with a 3KW Becker piston compressor (= 5KW chinese garbage). Depending on the air leaks in the machine, you may need to use a 25KW compressor. .....or more.

  6. Manroland 200 impression timing problem

    Camfollower has 3 stages. 1: no pressure 2: pressure plate-rubber 3: pressure plate-rubber-impression The positioner should prevent the 3rd position from being engaged earlier (Your problem). Also hold the 1st and 3rd positions.

  7. Manroland 200 impression timing problem

    Dо'n adjust in free position. Remove the positioner, disassemble it and see if the spring is o.k. Check if the bearing is not broken. It must be adjusted at the top of the eccentric.

  8. Manroland 200 impression timing problem

    Е

  9. Manroland 200 impression timing problem

    The eccentrics have a fixed position. Never move them from there. Your problem is in the positioner. Fix its spring or roller.

  10. Help me，about PARAFIN software

    What version is Windows, what version is paraffin and what is the inverter, what port are you using? I'm sure everyone knows these little things, but I've forgotten.

  11. Man Roland 300 - CPL process bus error

    There is no R700 with CPL. Your problem is completely different. I need more information.

  12. Roland 700 SPS BUS error

    Capture the error screen. Before that, change the language to German.

  13. Man Roland PRZ 00 2+0 / Tacho Generator Issue

    I had written the post in Bulgarian. Forum's translation is only partially similar.

  14. Man Roland PRZ 00 2+0 / Tacho Generator Issue

    Not repairable. Just new. Ring. Can be without tacho. PP I have one for parts.

  15. Roland R700 Feeder problem

    Take a picture of the list of errors before you hit "?" If you switch the machine to German it will be even better.

  16. Sometimes the numbers are not displayed

    No. I wrote above. Switch to German and everything will fall into place.

  17. 300 Computer error

    BIOS battery not ok.

  18. Sometimes the numbers are not displayed

    Lost in translation. It happens often. The machine is made in Germany, not in China.

  19. Roland 700 SPS BUS error

    Is the SPS loop closed? Is this a new installation? How did the machine stop? Is "Status7" checked? Series? At least what year was the machine manufactured? Now you call the car service saying: Why doesn't my car start?

  20. Roland 700 operating manual

    No hello, no good day. Strange manners.
Back
Top