Search results

On this screen there are at least 3 errors that do not allow the machine to move. Defective 2 bytes are on the first (left) input board. Slot3, A350.

Missing phase.

I am not (anymore) trying to fix Roland's problems. I am sorry that this industry has gone the way of the automobile industry. I have no more than 10 years of work left. Machines manufactured before 2010 will work that long. Europe's rush to catch up with China in producing bad and cheap goods...

Structurally, R700 has not changed. But: in order to be cheap, the bushings of the plate cylinder bearings have been removed. The automatic bearing lubrication on the B side of the machine has been upgraded and I now have locked bearings in both places. The face is modernized by artists. Not...

If it weren't for innovation (the unique technical ingenuity), Evolution Roland wouldn't be in this situation. The incompetent designers killed the company.... most likely by order. The policy of limiting service, lack of information and undervaluing old staff are deadly. I can tell you in...

Parameter set is selected when starting the inverter. Do not play with the machine. It will become broken.

There are 4 parameter packages. At startup the inverter selects the package that is set to be used. I think for you this is package 0 or 1. 3 and 4 are factory default.

Yes. You can. Parafin is used because the file format on Roland diskettes is not compatible with the Baumuller program. Copying parameters from one inverter to another is possible with it. Att R704+LTL, R705+L, R706 parameter set. included parameter as TXT

Check (compare) the mechanical with the electrical "0" of the machine.

Check the slow speed. If the HA parameters are wrong, it may not position properly. The HA parameters must be written to the inverter with Paraffin. The program is included in the diskette set. Att. PPL position:

The parameters must be loaded from the original HA parameter diskette. RTR has 1480 possible errors. Which one of them. PP. The machine does not change plates even if there is an error in the register motors.

I wrote to you. This is a Roland. It's not a multicooker. This is the SPS network. Where exactly is this motherboard?

Chock, this is Roland, not your wife's multicooker. There are many CPUs on this network, and they all work fine once they show the error.

Capture the inverter error.

These are two problems. 1. The 6th slide on the 3rd PU is defective or the cable is not plugged in properly. 2. There is a defective processor board in the machine. Most often in the delivery. Slot 2/A355. Replace it with a 2PU processor board. !!!!Power OFF !!!!

Switch the error menu to German and take a screenshot. If translated correctly, you have at least one slider in the wrong position. Write with which CCI system the machine is. At least what year the machine was manufactured. There are 3 models of ink sliders.

Via WhatsApp can't set zero.

Problems with the stator current are due to poor contact, usually in the motor housing or a failure in the inverter (less often). Most often it is a failure in the motor itself. The winding breaks randomly at a certain moment. On the motor itself, the cooling channels inside it must be cleaned...

Paraffin is not a Baumuller program. Paraffin can only load parameters written by Roland. Baumuller service software is used for repairs. If this is your first inverter you repair, be prepared for a long struggle. You need an electric motor for testing. At least.

If the differences are small, it can. If there are differences greater than 40 steps, it can't.