Search results

The only way I know of to get the numerical drum life (yield) % numbers is in service mode (* 28 *, copier, misc.) The user side & web interface bars are really vague (50-100% shows as full bar e.g.) and command workstation doesn't report a drum status at all for this machine. It would...

There is a laser kromekote now available packaged natively in a 19 x 13 size it seems. A couple places stock it including www.bradnersmith.com for example: 19 × 13 86.84M 12pt White Kromekote C1S Laser Gloss - Carton $260.74 MSH $300.25 CWT This comes out to $0.40 per sheet though vs...

Johnson Stapler Repair has EBS staples available online now for $3.95 per box of 5,000 - http://www.johnsonstapler.com/product/210%2F6EBS

Open the front cover Lower the main blue lever (the one that lowers the itb assy or that you lower to change drums, just the blue one.) Then the translucent clear plastic waste toner container pulls right out so you can empty it. I find the easiest way to empty it is to remove the clear plastic...

Good deal. And I'm glad to hear that it wasn't too bad to rebuild the fuser. I had feared it might be really tedious and I might have to do myself it if we keep an off-lease machine this coming year. I don't know anything about refurbishing drums. I don't think I'd risk it as long as there is...

Even though I'm pretty sure you've already solved this, for anyone reading this thread later, the fuser is super easy to remove from the machine. Once you pull out the fuser "drawer" looking from above the two screws closest to the outside (left) of the machine are the ones you remove and then...

A day late and a dollar short, but yea, usually once you get a crease in the fuser roller within the next thousand or so it will start either jamming the paper or else a chunk will rip off and stop the fuser from turning completely which turns a jam error and I imagine isn't great for the gears...

Sorry - didn't see this thread until now. Did you solve it? I've only taken a peak inside the fuser once five years ago and I wasn't sure how easy it would be to rebuild them. Ours have been under service contract so we haven't had to worry about rebuilding fusers which has been nice. Before we...

I order frequently from www.thepapermillstore.com as I enjoy their selection and service For some translucent and metallic envelopes, there's www.envelopemall.com if you're doing short runs (boxed by the 100) - the nice thing is that they have a good variety of sizes of each stock. Maybe...

To print to some older canon fiery rips that don’t have 64-bit print drivers for windows 7, I’m using the free built-in Windows Virtual PC XPMode virtual machine where I can print to the standard 32-bit fiery xp print drivers. It works, but it seems very very slow. Spooling a 250 MB print file...

If you have the same issue from multiple computers printing to the same fiery then scratch my question regarding the printer port settings. I was wondering if something was up on the local machine printer port. If you print the settings page from the fiery rip itself, does it list an update...

Good deal! And my pleasure.

I'm glad you are liking your 252 as well as I've liked our 242 over the past couple of years -- really can't figure out how I made out without it whenever I use one of the machines we upgraded from to run a job! Do you know if your machine has a skew fine adjustment mechanism? I heard once...

I have been lucky and haven't had to troubleshoot the fiery rips here much at all so I'll have to let someone else jump in. I use CorelDraw some and have experienced an intermittent issue where sometimes corel will send bad output to the postscript driver which ends up going through the...

Don't touch the transfer belt printing area at all - touch it only by the edges and carefully. It's best if you have a service contract to watch a tech do it as they can do it in their sleep and it's easier to do than to explain, or if you have a manual. But if not, be careful as a mistake...

Well, my bet is that you need to either clean or rebuild the ITB transfer belt assembly. Hopefully just cleaning under the belt will be enough this time to save you the money of the rollers if you're not on a service contract.

What app are you printing from? Does it now not print from any application using the postscript driver? (e.g. can you try printing a pdf from adobe acrobat reader or another app vs. what you usually use.) If you look at the printed job list in fiery command workstation, do you see the...

If you do a full auto gradiation adjustment are the c, m, y, and k blocks offset from one another (different distances from the edge of the sheet) Over the past 7 years, every time I've had a registration problem between colors with my canon 3200 or 3220 it's been because toner got under the...

Now that I'm running a 64-bit os with 24 GB of memory, I moved my swap and printer spool directories to a ram drive using qsoft ramdisk on windows 7. So far so good with no apparent problems and no more waiting for windows to run through large jobs in the printer spool...

The only PPD I've ever seen for the docucolor 242/252/260 with bustled fiery is this one which I use with coreldraw: * Filename EF5P1012.zip * Date Apr 16, 2007 * Size 24.9 KB...