found out the problem,It was not shown in the Svc Man I had
the drive gear assy was out of sync with the gear assy on the frame, very easy to...
As Best I remember the spf10 did not have inverter in the first units out,
the 20...that should be right there under the front panel...
Yes on all questions
It Printed the "demo" perfect except the black was not working
I did the cart change and found out it was the spring...
There are a lot of sensors in this unit,
That pic indicates by the Manuel there is a breaker tripped/reset
I just did one today
I Posted this on the laser printers forum here too
HP 3800/ canon c1022 The color image just stopped 3" from top color band test
Have you pulled the operators side off ,or look under the access panel in front for the breaker resets inside,
Sorry for the late resopnse
The fix is even more simple
One is the MOV is blown on the motor board under end cap, just remove mov (dead Short) and...
NO errors on start up or printing!!!!
The Image prints full color on the band test and this is the image
its the same for all...
New to this forum
Please help me out
Wasting TONS of ink with this
I do have it set NOT to ck Ink levels due to...