There are three hints only.
Underneath the front table you have the mains switch, the pressure adjustment knop and the lock valve for...
On the right side of the machine you have a cover. If you open it, you see right of the hydraulic cylindre a wire. This wire is...
To late - He has his documentation
But - Thanks anyway
Молоко - есть только три буквы О.
Regarding the drawing and the operating manual I need the machine number.
To get you the right drawing I nee d a mail address and the correct machine number
Do not cut anymore!
First take a look if the shear bolt inside the connecting rod (connecting paese from the gear box to the knife carrier) is...
The error message list does not give you anything. Maybe it would be even confusing. You guidance. You tell the problem and I try to help....
The number 128 means cut buttons faulty. This is easy to fix, just change the cut buttons.
The other numbers are normal text and an...
There is nothing you could do on your own. On the machines 78ES “mostly” the transformer TR1 for the power supply is gone. The...
Finally I made an instruction and send to your mail address.
If you are in manual mode you can cut whenever and where you want.
If you use a program the automatic function is switched off the machine is...
Yes your machines are from the EMC II (2) generation.
To answer your question correct the program 0 beginning with software version V3.0 and later...
There is no software problem!!!!!!!!!!!!!!!!!!!!!
The error message “position not echieved- -79” is because the software (which is...
I hope you have now two information’s about the auxiliary function.
One is the instruction to switch on this function and the other is...
If the cut is normal finished (knife and clamp (!!!) are in its upper position) you have two possibilities.
After the cut the...
Before it would be correct to send you something, we have to talk about some generell questions.
Which machine do you have? A Polar...
The LED V88 has the same meaning like the error message.
The board SK detected a fault. The board SK is not faulty!
The SK board has no RESET...
Before I am able to help I have to understand the problem.
Using the Polar terminology the safety is a big locking device for the knife...
The error message “CUT CIRCUIT STATIC FAULT – 131” is related to the cut circuit control system.
The cut circuit is controlled and organized...
Yes, the relays should be the first thing to be replaced. And I am sorry, I do not have any specification for individual components.