Technotrans compressor not working

Hi everyone, last week our compressor wasn't starting so we ended up installing a new since the original one seemed to have been stuck due to running with low pressure refrigerant. Now on Monday when we switched on the machine, again the same issue.

Even the exhaust fans at the top are not working. Attaching error images for reference.

 

Are sure the circulation pump is running? In addition, you need to fill some water to "C" circuit.

 

hi dear sir, the compressor does not start because there are conditions that are not met. can I have pictures of the interior of the technostrans to better help you. thanks very much

 

So we added some water and took actions as per the troubleshooting instructions on the technotrans display and the problem was resolved. Thank you for your inputs

 

You need to searsh the cause of this issue .
you may be able to find a leak somewhere.
check at the level of the main circuit valve, at the level of the distribution tees, at the level of the rotating joints in each printing unit, at the level of the ink rollers and finally check the safety valve in the cabinet next to the pump of distribution.
if you have not solved the source of the problem it may come back, as a result the compressor motor does not turn and the solution supply pump also stops reading the ipa and error 9 will appear
Good luck