Hiedelberg 102 5 col with perfector

Hi, problem with press being locked out. Symbol for moitoring the allocation of reversing drum to storage drum. Press is an old l996 model and perfector on 3rd unit. Any clues anybody ?

 

Check the toothed belt on the synchronization pulley under the OS cover of PU3…could belt or switch issue. Prior to conversion to perfect, was storage drum in “0” position? May want to go back to straight print and check this first.

 

hello dear sir, could you show us a picture of the error displayed by the machine. thank you

 

Hope these images help

 

Hope these images help

 

Hello can I see your withdrawal systems! Mechanically, is the machine online or in withdrawal? On the screen is the machine online or in withdrawal (electronic)

 

Hello sir , you need to change the machine mecanically to straight mode and then reset sak board .
Good luck

 

Hi i am having the same issue on my sm 102 4 color perfector. How do i change the machine mecanically to straight mode?

 

Hi i am having the same issue on my sm 102 4 color perfector. How do i change the machine mecanically to straight mode? My press is locked up and can’t move unless i release the brake.

 

Did you ever figure this out because I’m having the issue.

 

Hello dear sir, can I see what your screen displays?

 

how did you get this problem , please describ more ??
Is the machine on straight mode or perfector

 

Ok so we wanted to take the unit 3 blanket washer out to clean it but there is a locking arm for the perfector in the way. I went to the console and started the process to go into perfect and the locking arm came down so we took the blanket washer out and then I just canceled the process at the console without doing anything mechanically. The next morning another operator tried to put the press into perfect he went through the processes but now the press is locked up and can’t move. The console says it’s in straight print, the pin in the side of unit 3 is all the way in indicating it’s in straight print, but the perfector gear is stuck in perfect at 635mm. I also found a broken sensor and i will be replacing it tomorrow.

Model: SM 1o2 4 p3, 1998

Serial number: 541214

 

How do I reset the sak board

 

Two brass pins on front of board, short out with screwdriver or similar item for a few seconds.

 

Like junker told you short the pins near to the cpu for exactly 30 seconds .
Let me know if hou need more information take me picture of your sak yo be sure of version there is two type

 

Good day everyone.. please am having an issue on my machine.. it's not inching and the error T coming up.. pls I need assistance because this issue has made my line down for more than 6 days now.

 

Codes translate to communications errors, so the first thing you should do is turn power off and reestablish pin connections of all boards in main cabinet by unplugging and plugging back in.

 

I have done that still same problem continue