Heidelberg SM74 4 (mod2004) inkzone problem

Discussion in 'Heidelberg Printing Presses' started by Mouzdahir, May 1, 2023.

  1. Mouzdahir

    Mouzdahir Member

    Joined:
    Feb 2021
    Messages:
    8
    Location:
    Morocco
    Hello forum
    I have some problems in my sm74 inkzone
    ( connection to the remote ink zone adjustment could not be established ) this message appears on cp2000 and the display of ink won’t light up
    And the ink motor on first unit won’t turn on ( The three others units works fine )
    Any suggestions ,thanks
     
  2. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    348
    Location:
    Côté d'ivoire
    Can see picture
     
  3. Mouzdahir

    Mouzdahir Member

    Joined:
    Feb 2021
    Messages:
    8
    Location:
    Morocco
    Yes please
     

    Attached Files:

  4. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    Wich machine is this ??
    Modular or cp2000 ??
     
  5. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    Can you give me the error code of this issue ??
     
  6. Mouzdahir

    Mouzdahir Member

    Joined:
    Feb 2021
    Messages:
    8
    Location:
    Morocco
    Cp2000
    Sm74 4 colour Year 2004
     
  7. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    I will check that for you tomorrow .i must see the wiring diagram
     
  8. Mouzdahir

    Mouzdahir Member

    Joined:
    Feb 2021
    Messages:
    8
    Location:
    Morocco
    Ok Thank you
     
  9. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    Mr mozdahir, please make this diagnosis:

    First of all, make sure that the communication cable is properly wired (pink cable) on the SCU side and on the IDCB card side of the inking motor control in the inkwell.

    Check the presence of the DC24 voltage for controlling the IDCB in plug X11

    Ensure voltages +5 v, +15 v, -15v in the switching power supply on the IDCB

    Give me the state of the leds that you will find on the IDCB (led H3 on the left next to the X15 communication card and H1, H2 in the middle of the card.

    Please leave me photos of the condition of the LEDs.
     
  10. Temel

    Temel New Member

    Joined:
    Dec 2023
    Messages:
    3
    Location:
    Cyprus
    Hi my friends, we live the same problem on SM74-8 color.

    How you fix your problem? is it software or cable problem?
     
  11. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    Check your idcb card .
     
  12. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    If you can give me the status of the led it will be better
     
  13. Temel

    Temel New Member

    Joined:
    Dec 2023
    Messages:
    3
    Location:
    Cyprus
    No one turn on.
     

  14. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    Hi sir .

    Check the presence of the DC24 voltage for controlling the IDCB in plug X11

    Ensure voltages +5 v, +15 v, -15v in the switching power supply on the IDCB.

    Good luck
     
Loading...