Roland 706 LTTLV

Hello everybody, My name is Bassirou, I am from Dakar; nice to join you. My 706 LTLV is showing this message when running plate load or unload on the last printing module.
I will kindly appreciate your help.

 

If you change the language of the machine to German, I will help.

 

Hello Mr Drukman,
I appreciate your kind help, You have right the machine is in a french spoken country. nevertheless I will try to send You screen shot in german. By the time let me translate for you:
-First line"SWR: Center axis not in reverse printing position."
-Second line "SPS: Perfecting module is not in home position"
I hope it would be useful
Once again thank you.

 

ALL machines manufactured at MAN factories have built-in German language. This language is the easiest to diagnose problems with. All translations, even in English, are wrong sometimes. Switch the machine to German and shoot.
If there is no serious mechanical problem, you should inspect and/or replace valve Y72 and Y73. If the central shaft is in the end position, check sensors B044 and B043 on the pneumatic cylinder.