Technotrans stops every 15 min.

Discussion in 'Heidelberg Printing Presses' started by Poval, Jan 29, 2020.

  1. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Do you have the technotran plate ID, and on what machine do you use it?
     
  2. Edwinfdz012579

    Edwinfdz012579 New Member

    Joined:
    Mar 2023
    Messages:
    2
    Location:
    santo domingo
    GRACIAS .
    SM 74-5-2000 TECHNO.jpg
     
  3. Nouman Javed Hakim Kh

    Nouman Javed Hakim Kh Member

    Joined:
    Jun 2020
    Messages:
    13
    Location:
    Dubai UAE
    must you will check error history ... and send me picture
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    Thank you by his reply .

    After check his model, please see this

    1) control system, defective , check if the LED is ON, otherwise, defective PCB, repair or replace it.

    2) reheat the PCB, for dry + colder joint solder !!!!

    3) test the +24Vdc regulated power supply in tolerance 0.7% up or down otherwise replace it !! + bridge rectifier after power transformer , can be defective

    4) look, for loose wires, and corrosion connector!!!
     
    Nouman Javed Hakim Kh likes this.
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    ok

    Let me know
     
  6. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Check alcohlol percentage in Alcontrol it will be showing >18%
     

  7. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    You need to give me error message on the alcosmart and history of problem yo see what happends
     
Loading...