Technotrans beta.d 40 L communication error

Discussion in 'Heidelberg Printing Presses' started by ElectroNick, May 14, 2022.

  1. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    Hello brothers!
    We have error F013 - comm. addr. 3 - TBC/TBU. I think it was problem with battery. Nothing works now. Help us, please.

    IMG_20220511_144421.jpg
     

    Attached Files:

  2. Mechanica Speedmaster

    Mechanica Speedmaster Member

    Joined:
    Mar 2022
    Messages:
    83
    Location:
    EU
    This error has following meaning:
    Communication error of the CAN address3. Loss of connection to Basic electronics of the dampening solution device (Exits of Basic electronics not set).

    Check in the TT el. cabinet if there are some LED diods on the TBC 50/51 or TBD 50 Board. You can also check power supply on this Board on the ST20 plug.
     
  3. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    Yes, there are two red LED diodes "RT" on the TBD40.1 plate. But one of them blinks and another lights. If I remove Can connector "ST3.1" nothing is changed.
     
  4. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
  5. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    I must show service page.
     
  6. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
  7. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    I can't understand zero baud rate. Why? )
     
  8. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    May be you can show me page from your machine?
     
  9. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    Power supply is ok.
     
  10. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    Thank you!
    I need to try changing the settings.
     
  11. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    I solved the problem. It was problem with electronic components on the TBD40 plate.
     
  12. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Nice to here.
    Can pls share the pix of particular area where you have change the components
     
  13. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
  14. ElectroNick

    ElectroNick Member

    Joined:
    May 2022
    Messages:
    12
    Location:
    KR Bishkek
    I hope this helps you. Although there may be different reasons. )
     
  15. beer8man

    beer8man New Member

    Joined:
    Apr 2023
    Messages:
    2
    Location:
    Samara, Russia
    Thanks, friend! I've got exactly the same issue on Beta.C (error F013). Circuit board is the same, firmware TBD 42.1
    Спасибо, дружище. Сегодня словил точно такую же фигню, технотранс бета-с. Плата такая же, прошивка 42.1. Хоть знаю куда копать.
     
  16. beer8man

    beer8man New Member

    Joined:
    Apr 2023
    Messages:
    2
    Location:
    Samara, Russia
    Thank you very much! The problem with DC-DC converter confirmed! I replaced it, and problem was solved.
     
  17. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Great
     
  18. Linus

    Linus Member

    Joined:
    Sep 2011
    Messages:
    44
    Location:
    Portland
    I also have same problem.
    F013 - comm. addr. 3 - TBC/TBU. This error showed first time for about 2 weeks ago. This usually happens on morning when machine starts. After few power cycle on & off it starts working. After it starts works it keeps on working (except for some time) whole day. May be those two capacitors has to be changed. I hope its not DC/DC converter. Any Suggestions?[​IMG]
     
  19. Linus

    Linus Member

    Joined:
    Sep 2011
    Messages:
    44
    Location:
    Portland
    Can we use the Unit as Standalone Unit without communications?
     

  20. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    No
    This error is belong to the tb10 and dispaly controller
    And if you wish
    Then you to modify wiring changes
    Then it will run as stand alone unit
     
Loading...