Splash/Splats.... Toner issue?

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by Joao Guimaraes, Mar 29, 2023.

  1. Joao Guimaraes

    Joao Guimaraes Member

    Joined:
    Nov 2019
    Messages:
    6
    Location:
    UK
    Hi, anyone struggling with unusual toner splats/splash's on prints? Magenta, Yellow and Cyan... LOADS.
     
    Joao Guimaraes, Mar 29, 2023
    #1
  2. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    Check the developer upper vacuum manifolds for blockage.
     
    Milo Wilson, Mar 29, 2023
    #2
  3. Joao Guimaraes

    Joao Guimaraes Member

    Joined:
    Nov 2019
    Messages:
    6
    Location:
    UK
    Spot on my friend. One of first many things to check ✅. But did not resolved the issue.... This is a ongoing thing with certain tonner bottles I believe, certain batch numbers of tonner... It's only this Igen spitting toner everywhere? Can't believe that!
     
    Joao Guimaraes, Mar 30, 2023
    #3
  4. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    Are you getting good airflow? Any of the main air lines in the back have holes in them?
     
    Milo Wilson, Mar 30, 2023
    #4

  6. Joao Guimaraes

    Joao Guimaraes Member

    Joined:
    Nov 2019
    Messages:
    6
    Location:
    UK
    Everything related checked and working as it should, only change when toner bottle is swapped. Some batch's are fine, other ones cause A LOT of splats. Further more, will be posting the suspected batch numbers.
     
    Joao Guimaraes, Mar 31, 2023
    #5
    Milo Wilson likes this.
Loading...
Similar Threads
  1. kiaelise

    Had HD failure, not stuck on Splash screen post install

    kiaelise, Mar 30, 2015, in forum: Xerox iGen3, iGen4, & iGen5 Digital Presses
    Replies:
    2
    Views:
    2,428
    peels
    Apr 1, 2015