Polar 55EM repair

Discussion in 'Cutters and Trimmers' started by Art_I_shock, Jul 8, 2015.

  1. DIM

    DIM New Member

    Joined:
    Jan 2022
    Messages:
    1
    Location:
    RUSSIA
    Good afternoon. There is a cutting machine Polar 55EM, No. 5551779. When switched on, the knife runs a trial run. The data changes on the actual position display. But on the display, where the data is programmed, there are just dashes. When you try to set the position of the knife, nothing happens. If you try to work manually with buttons, then the same thing. I have attached a photo.
    Best regards, Dmitry
     

    Attached Files:

  2. Buzarin Daniel

    Buzarin Daniel New Member

    Joined:
    Nov 2021
    Messages:
    2
    Location:
    Romania
    Hello ! Can someone help me with an electrical diagram for a Polar 55EM? Thank you !
     
  3. Alonex

    Alonex Senior Member

    Joined:
    Oct 2019
    Messages:
    121
    Location:
    USSR

  4. Buzarin Daniel

    Buzarin Daniel New Member

    Joined:
    Nov 2021
    Messages:
    2
    Location:
    Romania
    Thank you very much !
     
Loading...