SSK1 & 2 errors

Discussion in 'Heidelberg Printing Presses' started by Harco Nancy, Oct 1, 2022.

  1. Harco Nancy

    Harco Nancy Member

    Joined:
    Nov 2018
    Messages:
    50
    Location:
    Jl. A. Yani IV No.19A Medan
    Hi sm52 follower.
    We have a problem with our sm52-4 1999.
    Errors at ssk1 & 2 in init test like attachment picture
    We have try many effort like change ssk, sak, sek and ntk cards with the other sm52 machine., but the errors still appear.
    Any idea how to solve this problem will be appreciate
    Thanks.
     

    Attached Files:

  2. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    It s the same or this is onother machine ??
     
  3. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    348
    Location:
    Côté d'ivoire
    What is the problem on the machine?
    Either the ssk's are to be done or there are motors that make a return on the cards.
    Take a picture of the ssk cards so we can see if the ssk you want to change is really there with the machine on!
    What led you to the ssk on the machine? the real worry of the machine.


    Mr , beguin
     
  4. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Hi
    During boot up machine sw rotate all ssk motor clockwise ans anticlockwise and check internally the reading.
    Based on movement it give msg in in it test.
    103 means motor ok
    100 means motor not plugged in or doesn't rotate during power on (no or less curent with drawn) by motor
    101 means motor rotates but value is less means may there is mechanically jam
    Every machine has different configuration off ssk
    To check error belong to which motor
    Press
    Spanner button/spanner 2/123
    Then press left side + button till ssk1 display comes there you see ssk1 motor function
    Press again +then ssk2 motor icon will come
    Try to change/mechanical jamm check
     
    Michael Lee likes this.
  5. Harco Nancy

    Harco Nancy Member

    Joined:
    Nov 2018
    Messages:
    50
    Location:
    Jl. A. Yani IV No.19A Medan
    Same machine sir ?
     
  6. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    so if it's the same MOPV machine I think you have problems in the NTK24 power cards for the SSE block and the NTK 5 of the EHE rack and the SEK, check and tell me
     
  7. Harco Nancy

    Harco Nancy Member

    Joined:
    Nov 2018
    Messages:
    50
    Location:
    Jl. A. Yani IV No.19A Medan
    Hi sir, seem error like this now from first start ?
    The front and back table cannot move up and down.
     

    Attached Files:

  8. Harco Nancy

    Harco Nancy Member

    Joined:
    Nov 2018
    Messages:
    50
    Location:
    Jl. A. Yani IV No.19A Medan
    Front & back table cannot move up & down
     
  9. Harco Nancy

    Harco Nancy Member

    Joined:
    Nov 2018
    Messages:
    50
    Location:
    Jl. A. Yani IV No.19A Medan
    Ssk 1 & 2 cards its ok
    still blinking
     

    Attached Files:

  10. Harco Nancy

    Harco Nancy Member

    Joined:
    Nov 2018
    Messages:
    50
    Location:
    Jl. A. Yani IV No.19A Medan

  11. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    You need to enter on the menu of delivery to see what #12 mean
     
Loading...