Suction head CD 74

Discussion in 'Heidelberg Printing Presses' started by Jack liston, May 21, 2022.

  1. Jack liston

    Jack liston Senior Member

    Joined:
    Sep 2019
    Messages:
    265
    Location:
    Connecticut
    HELLO gentlemen is anyone familiar with gasket inside suction head on feeder ours looks worn /does this effect the amount of air pressure thanks Jack.
     
  2. Mechanica Speedmaster

    Mechanica Speedmaster Member

    Joined:
    Mar 2022
    Messages:
    83
    Location:
    EU
    Do you mean the white round gasket made out from felt?
     
  3. Jack liston

    Jack liston Senior Member

    Joined:
    Sep 2019
    Messages:
    265
    Location:
    Connecticut
    It looks more like heavy vinyl.
     
  4. Mechanica Speedmaster

    Mechanica Speedmaster Member

    Joined:
    Mar 2022
    Messages:
    83
    Location:
    EU
    ok ANYWAY YOU CAN CHANGE with on from felt, I did it so couple times.
     
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Yes of course, all part that look worn, in any machine has incidence, in all machine

    Please replace with the Original parts, very Important Fact
     
  6. Jack liston

    Jack liston Senior Member

    Joined:
    Sep 2019
    Messages:
    265
    Location:
    Connecticut
    Thanks Guys I appreciate the feedback and the forum.
     

  7. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Thank you sir
     
Loading...