Heidelberg 102FL Eak and Hak error

Discussion in 'Heidelberg Printing Presses' started by Jatin Patel, Feb 28, 2022.

  1. Jatin Patel

    Jatin Patel Member

    Joined:
    Feb 2022
    Messages:
    9
    Location:
    India
    Dear Friends,

    I have Heidelberg 102FL cptronic machine.

    Recently machine has stopped with errors in Eak cards and Hak card.

    Machine is not able to inch or run.
    File can move up and down at both sides.
    Damping of first 3 units are working but rest arent not.

    Also the engineer says there is some issue with my varinat codes.

    I dont have the orginal variant code copy.can someone help me with one?

    Attaching the errors page images and variant code page images.

    Please guide.
    Machine is not in production since a week.
     

    Attached Files:

  2. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    857
    Location:
    Casablanca
    Hello,
    Can you tell me what are the problems you had on the EAK and HAK ?
     
    ABDALLH SANDAFI likes this.
  3. Jatin Patel

    Jatin Patel Member

    Joined:
    Feb 2022
    Messages:
    9
    Location:
    India
    Thanks for replying.

    Currently the machine is at complete halt. It is neither inching nor running.

    Shows error in eak 3 ,eak4, eak5 and in one of the hak card.(sjared images of the same)
     
  4. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    857
    Location:
    Casablanca
    Send me all init machine test
    Rek1, rek2, sak, slt con etc
     
    ABDALLH SANDAFI likes this.
  5. Sandeep kumar

    Sandeep kumar Senior Member

    Joined:
    Jan 2018
    Messages:
    122
    Location:
    Gurgaon
    Dear Jatin,
    You can use following variant code
    For more information
    Youcan contact me at 00919810902830
     

    Attached Files:

  6. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Hi jatin
    Can you confirm machine is CD/hd/sm 102 fl
    Based on the same we can provide you the full support.
    You can reach to us
    +91 9818492864
     
    MRTYMM likes this.
  7. Jatin Patel

    Jatin Patel Member

    Joined:
    Feb 2022
    Messages:
    9
    Location:
    India
    Rest all seems fine.Error is shown only in these two.

    Thank you so much.

    I got original variant code of my machine from my Engineer who installed the machine for me.

    Thank you so much for help.
     
  8. Jatin Patel

    Jatin Patel Member

    Joined:
    Feb 2022
    Messages:
    9
    Location:
    India
    It is speedmaster. 102 F+L

    I have got my code. Now have to try adding it. if you can please guide ,
     

  9. Jatin Patel

    Jatin Patel Member

    Joined:
    Feb 2022
    Messages:
    9
    Location:
    India

    Problem is with my variant code. Got the original codes but dont know from where I can edit it.
     
Loading...