Piller IR Dryer error A30 current line unknown

Discussion in 'Heidelberg Printing Presses' started by therain16, Jan 10, 2022.

  1. therain16

    therain16 Member

    Joined:
    May 2018
    Messages:
    9
    Location:
    France
    Dear all,

    Need help to solve this issue
    Comcon 110 error A30 current line unknown
    I have seen a post that talks about characteristic curves. any one can give more information how to learn them to PLC?

    Thanks in advance.
     
  2. ashok kumar

    ashok kumar Senior Member

    Joined:
    Nov 2017
    Messages:
    224
    Location:
    india
    Hi
    Reach me at +91 9818492864
     
  3. therain16

    therain16 Member

    Joined:
    May 2018
    Messages:
    9
    Location:
    France
    Thank you for your reply,

    Actually I figured out how to fix the issue.

    Regards.
     
  4. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    Can you share the solution with us ?
     
    ABDALLH SANDAFI likes this.
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir;

    Normally this problem A30 INDICATES the regulator for the infrared power has reached the 100% limit.
    Correct balance adjustment, see his schematic diagrams electrical
     

  6. Adil

    Adil Senior Member

    Joined:
    Nov 2021
    Messages:
    856
    Location:
    Casablanca
    I think this problem has a relation with the characteristic curves which must be reinstalled; if therain16 has solved the problem, I invite him to share the solution with us
     
    ABDALLH SANDAFI likes this.
Loading...