POLAR 115 EM and 115EMC position not achieved

Discussion in 'Cutters and Trimmers' started by mbosko, Aug 18, 2015.

  1. Janakiraman

    Janakiraman Member

    Joined:
    Sep 2021
    Messages:
    5
    Location:
    India
    Hi Sir,
    The model No is 115-EMC-Mon and S.No of the machine is 6232038.Thanks
     
  2. Terrancy Mukome

    Terrancy Mukome New Member

    Joined:
    Jan 2020
    Messages:
    2
    Location:
    Zimbabwe
     
  3. Terrancy Mukome

    Terrancy Mukome New Member

    Joined:
    Jan 2020
    Messages:
    2
    Location:
    Zimbabwe
    Hello.can i have electrical diagrams for polar 155 emc machine
     
  4. Janakiraman

    Janakiraman Member

    Joined:
    Sep 2021
    Messages:
    5
    Location:
    India
    Thank you.Already we have resolved this issue and the problem was in the backauge motor brake.
     
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    ok, sir

    Blessing
     
  6. Janakiraman

    Janakiraman Member

    Joined:
    Sep 2021
    Messages:
    5
    Location:
    India
    Thank you so much sir.take care and be safe
     
  7. Janakiraman

    Janakiraman Member

    Joined:
    Sep 2021
    Messages:
    5
    Location:
    India
    Dear Sirs,
    Could you please share the Kodak trendsetter 400/800 CTP PM schedule if anybody have.Thank you .
     
  8. nickushorul

    nickushorul New Member

    Joined:
    Feb 2023
    Messages:
    4
    Location:
    Romania
    Hi sir,
    I have a polar 155 emc and after power loss on biggest display show ---.--- blinking and not respond to any function except cut.
    I cand cut but i cannot enter any number for backgauge.
    Please help me
    Thank you !
     
    Last edited: Feb 8, 2023
  9. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir;

    Please test the power supply for the Keyboard.
    Display BT; +9VDC
    Keyboard BR; +5vDC
    Tolerance for both 0.7% up or down.
     
  10. nickushorul

    nickushorul New Member

    Joined:
    Feb 2023
    Messages:
    4
    Location:
    Romania
    All the voltage it is ok!
     
  11. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    are in tolerance Sir for Keyboard ?????

    You must test that. very well.....................!!!!!
     
  12. nickushorul

    nickushorul New Member

    Joined:
    Feb 2023
    Messages:
    4
    Location:
    Romania
    yes it is 8,67 and 5,12V
     
  13. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Sorry Sir, the Voltage is out of tolerance,Are Faulty, that is the problem.

    Repair or replace it!
     
  14. nickushorul

    nickushorul New Member

    Joined:
    Feb 2023
    Messages:
    4
    Location:
    Romania
    Sir, i try to insert 9.10V in BT board but same thing. WIN_20230215_08_54_54_Pro.jpg
     

    Attached Files:

  15. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi, you are inserting 9.10 Vdc, is wrong, and you must sure that the power supply as I did indicated before +5vdc must be o.k in tolerance.

    By other side, look, for dry solder, colder solder. very well ......and proceed with this technic. !
     

  16. Rohith

    Rohith Member

    Joined:
    Mar 2024
    Messages:
    6
    Location:
    India
    Only the front of my emc137 polar cutter changes measurement units. Why does that happen?
     
Loading...