Heidelberg sm 74s 3p

Discussion in 'Heidelberg Printing Presses' started by Himanshu Arora, Jul 19, 2021.

  1. Himanshu Arora

    Himanshu Arora New Member

    Joined:
    Jul 2021
    Messages:
    2
    Location:
    New delhi
    Hello , I have Heidelberg sm 74s p3 press. Recent buy. Year 2000
    I used this press in straight printing. I am facing some registration issues, between 1,2 unit with another 4 units.
    When we register the job, suppose 1st unit is our black and 6th unit is our pantone color. When we register both we face left right issue. Please advice
    Please help with this issue; awaiting for your support
    Thanks
     

    Attached Files:

    Last edited: Jul 20, 2021
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir;

    Will be a good idea to test the Transfer drum grippers bar.

    Here is how to work.

    The transfer cylinder U1 is
    equipped with one gripper bar.

    The transfer cylinder U1 takes the printed sheet
    from the impression cylinder and transfers it to
    the subsequent transfer drum U2 or, in presses
    with perfector, to the storage drum.

    The transfer cylinder U3 takes the
    printed sheet from the transfer drum U2 and
    transfers it to the subsequent impression cylinder
    or, in presses with perfector, to the storage
    drum.
     

    Attached Files:

    Himanshu Arora likes this.
  3. Sandeep kumar

    Sandeep kumar Senior Member

    Joined:
    Jan 2018
    Messages:
    122
    Location:
    Gurgaon
    This can be done by mechanical specialist
     
    Himanshu Arora likes this.
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi am agree,

    Is difficult job, you must have many Skill and experience to do it , this kind of job.

    Call some one in Heidelberg mechanic.

    Blessing
     
    Himanshu Arora likes this.
  5. asem alsafady

    asem alsafady Senior Member

    Joined:
    Mar 2016
    Messages:
    179
    Location:
    Amman Jordan
    Dear Himanshu
    As I understand your machine is 6 units.
    As there are many gripper bars, you have to know WHERE to check, follow are some hints.
    First, I prefer to print at your first unit only, then repeat the printed sheets again, check the registers (at the lead edge). If you have mis-register(s) then you know that you have to check everything from feeder to the 1st impression cylinder.
    If your registers are OK then join the 2nd unit and print 2 colors, then check your registers again, until you can catch WHERE is the bad grippers.
    You may find dirty gripper pad, jammed grippers, bad cam follower, bad grippers adjustments, or broken spring rod.
    Hope this will help.
     
    member 18943 and Himanshu Arora like this.
  6. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    348
    Location:
    Côté d'ivoire
    hi dear sir if your problem is due to the registry check this card in the lectern see if it is not spoil
     

    Attached Files:

  7. Himanshu Arora

    Himanshu Arora New Member

    Joined:
    Jul 2021
    Messages:
    2
    Location:
    New delhi
    Thank you for your support; we will check and report
     

  8. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Sir;
    Did you check this steps attached?


    Will be a good idea to test the Transfer drum grippers bar.

    Here is how to work.

    The transfer cylinder U1 is
    equipped with one gripper bar.

    The transfer cylinder U1 takes the printed sheet
    from the impression cylinder and transfers it to
    the subsequent transfer drum U2 or, in presses
    with perfector, to the storage drum.

    The transfer cylinder U3 takes the
    printed sheet from the transfer drum U2 and
    transfers it to the subsequent impression cylinder
    or, in presses with perfector, to the storage
    drum.


     
Loading...