Pollar 115 EMC monitor

Discussion in 'Cutters and Trimmers' started by Jais Hansen, Mar 26, 2020.

  1. Jais Hansen

    Jais Hansen New Member

    Joined:
    Mar 2020
    Messages:
    1
    Location:
    PA
    I have a problem with a pollar 115 EMC saying cut interrupted and clamping time interrupted. I tested the cutting switches and see 24V on the cutting switches but am not sure where to go from here. Could somebody kindly share electrical prints.
     
    gavywill likes this.
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    Attached is there the circuit diagrams for cut EMC monitor

    Please look carefully the power supply, as indicated by me in Red circle, and +24Vdc for cutting switch b28a+b28b+

    Let me know , sincerely

    Blessing
     

    Attached Files:

    gavywill likes this.
  3. JohnCaratteri

    JohnCaratteri Member

    Joined:
    Jun 2021
    Messages:
    11
    Location:
    France
    Can you tell me how to set up autotrim on a polar EMC Monitor 137 or 155 cutter please? I'd have to set it up on the screen, but no knowledge of those old paper cutters.
     
Loading...