Software issue with Rolland R306

Discussion in 'Man Roland Printing Presses' started by Bapu Pangul, Mar 18, 2021.

  1. Bapu Pangul

    Bapu Pangul Member

    Joined:
    Sep 2020
    Messages:
    12
    Location:
    Mumbai India
    Dear sir

    Facing software issue with the Rolland R306 machine.machine shows contact Rolland service team.

    Please help for the below mentioned issue

    IMG-20210318-WA0020.jpg
     
  2. Asim Shehzad

    Asim Shehzad Member

    Joined:
    Feb 2021
    Messages:
    78
    Location:
    Lahore, Pakistan
    hi,
    since you have a PMD occurred While writing on the hard disk
    a blue screen appears with the following message:
    "writing post mortem dump occurred"
    Then other messages appear:
    "Error message"
    SYSTEM ERROR: Please restart your press
    with the main switch (Power OFF / ON)!
    You need a PMD diskette for copying data and send it to manroland for evolution.
    The evaluation of the PMD file is done at
    manroland.
    once you copied the data with PMD diskette you will out of PMD
     
  3. drukman

    drukman Senior Member

    Joined:
    Mar 2016
    Messages:
    272
    Location:
    Bulgaria
    Replace the Dallas chip on the computer. If the hard drives are original, change the HD setting in Bios with the ones set by Roland.
    ....
    PMD is nonsense.
     

    Attached Files:

    bLuuR likes this.
  4. Daniel.Sanchez

    Daniel.Sanchez Senior Member

    Joined:
    Apr 2020
    Messages:
    101
    Location:
    peru
  5. Daniel.Sanchez

    Daniel.Sanchez Senior Member

    Joined:
    Apr 2020
    Messages:
    101
    Location:
    peru
    we repair these cpu, we also do configuration in MS-DOS includes the installation of the leistand, and we adapt hdd cf,
     

  6. sergios68

    sergios68 Member

    Joined:
    Jan 2014
    Messages:
    79
    Location:
    Monterrey, Mexico
    good luck with this old CPU....
    better to get an upgrade for the central console (leitstand)
     
Loading...