Looking for maintenance training level 1 and level 2 on Heidelberg SM74-2 or similar

Discussion in 'Heidelberg Printing Presses' started by SatLangama, Apr 21, 2021.

  1. SatLangama

    SatLangama Member

    Joined:
    Oct 2018
    Messages:
    14
    Location:
    yaoundé, Cameroon
    Dear all,

    I am a maintenance technician, working for the printing service since 3 years.
    I would like to have a special Maintenance traning level 1 and level 2 on offset printing machines.
    In our workshop, we have the following HEIDELBERG machines :

    -Speedmaster 74 2P ;
    -MO-E 64 and ;
    -GTO 46.

    Can someone help me where to find a training center or a printing compagny who can welcome me for this training ? I will pay for the training ; also travel and accomodation will be in my charge.

    Kindly help me with this training.

    Best regards.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Dear Sir;

    I strong recommend you, put in contact with Heidelberg organization, and they Holding many training courses around the world, maybe close to you.

    Write to Heidelberg, and asking for this Special training Courses, around the World, and they will be in contact to you, and indicate which is better for his necessity.
     
  3. SatLangama

    SatLangama Member

    Joined:
    Oct 2018
    Messages:
    14
    Location:
    yaoundé, Cameroon
    Hello,
    Thank you for your reply. However, i did already contact Heidelberg about this. They said that they do not offer traning on Speedmaster 74-2p, MO-E and GTO 46 anymore ; they just offer Customer Maintenance Trainings for the Speedmaster XL 106- and the Speedmaster XL 75-machines, which should have different technologies then our offsets presses machines. That is why i am looking for another way to get this maintenance traning.

    Regards
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Honestly, will be difficult, maybe you can try with Heidelberg USA, for to do this.

    They are open mind, and can help you, with this situation.

    I know, they offer this training .

    Let me know, sincerely, send me his email

    Blessing
     
  5. SatLangama

    SatLangama Member

    Joined:
    Oct 2018
    Messages:
    14
    Location:
    yaoundé, Cameroon
    Hello Chock
    Kindly find below my email.
    chamberlais@gmail.com.
    You can contact me directly other there. I can see that you know well the subject.

    blessing
     
  6. turbotom1052

    turbotom1052 Senior Member

    Joined:
    Oct 2008
    Messages:
    1,044
    Location:
    Vermont
    Where are you located, and would you want someone to come to your plant for training?
     

  7. Waqas_zahid

    Waqas_zahid Senior Member

    Joined:
    May 2011
    Messages:
    234
    Location:
    Pakistan
    I might be able to offer you something, pls check your inbox
     
Loading...