Transfer cylinder covers on sm102

HELLO gentlemen how do I tighten the covers on sm 102 year 87 there are 2 17mm bolts on a rail in the middle of the cylinder iwas wondering if it is the adjustment thanks Jack.

 

Please can you let us see some picture of what you are talking about.

 

1st and 3rd transfers? Center (double drum) transfer? If you're speaking of the first and third transfers, and your shells are bouncing (as in, you can slide your fingertips under the lead edge segment and move it up and down, it's not latched in properly or there is significant wear. There are no adjustments , only a very expensive repair.

 

Thanks for reply junker not causing any problems yet was in there with the grease gun and noticed it was loose another good reason to use the grease gun.