Komori 2colour 2nd unit continous line coming when printed screen

Discussion in 'Komori Printing Presses' started by Maxongeorge123, Nov 21, 2020.

  1. Maxongeorge123

    Maxongeorge123 Member

    Joined:
    Nov 2020
    Messages:
    7
    Location:
    Inida
    Sir this is old machine from japan after maintenance and printing registratiin is ok. But when printing screen 80% there is a line in the second unit.please help me to find the aolution
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir :

    Do you have a Pic

     
    Maxongeorge123 likes this.
  3. Maxongeorge123

    Maxongeorge123 Member

    Joined:
    Nov 2020
    Messages:
    7
    Location:
    Inida
    Hello sir. Thank you for your reply. Actually my father is a printing machine mechanic. I am in UAE. Now he is working for komori sprint. He is not using camera phone and I have no photos. He is telling when taking screen from side to side there are lines. Not from tail to head.
     
  4. Maxongeorge123

    Maxongeorge123 Member

    Joined:
    Nov 2020
    Messages:
    7
    Location:
    Inida
    Am not sir am very younger just trying to start a career for printing press and printing machine mechanic
     
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    Normally, when this happen is the ball bearing in the cylinder, to due the normal wear in the ball bearing.

    Only the factory, has the tolerance, that they need for to replace, very Important!!

    However you must test all adjustment, from Ink Roller, Water, Pressure, and paralelism of cylinder.

    If there are ALL o.k proceed with the before indications above

     
  6. Maxongeorge123

    Maxongeorge123 Member

    Joined:
    Nov 2020
    Messages:
    7
    Location:
    Inida
    Thanks alot sir. But if bearing problem there may be some vibrations or sound. But not that anyway my father will cross check one more time and if found surely i will let u know.

    Thanks sir for your valuable time.
    Hope you will help more
     
  7. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    ok sir

    Let me know, sincerely

     
  8. Maxongeorge123

    Maxongeorge123 Member

    Joined:
    Nov 2020
    Messages:
    7
    Location:
    Inida
    Sir,
    Now the problem solved by my father. He reset all the rollers one by one. Now print is perfect but one problem: ink roller is not automatically off. But he will rectify now. Sir I reached India. I will take photo and send once I finish quarantine
     
  9. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    ok Great

    Blessing
     
  10. Maxongeorge123

    Maxongeorge123 Member

    Joined:
    Nov 2020
    Messages:
    7
    Location:
    Inida
    Sir this is 2colour komori sprint
     

    Attached Files:

  11. Maxongeorge123

    Maxongeorge123 Member

    Joined:
    Nov 2020
    Messages:
    7
    Location:
    Inida
    My father worked this machine. Now its ok but one more problem after printing 4 colour the registration going out.
     

    Attached Files:


  12. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    The problem with the registration, can be too many factors, please review this:

    1) Lateral guide bad function, oscillators grippers, inferior guide

    2) humidity paper, to due recently fabrication .the humidity will be 55-60% to 18-20grades C

    3) Printing paper with the Fiber in Reverse direction.

    4)Out of register , in the sense of packaging of cylinders,, add or take out according.

    Merry Christmas.
     
Loading...