Heidelberg Speedmaster 2005 sm102 10 color

Discussion in 'Heidelberg Printing Presses' started by Crawpress123, Dec 2, 2020.

  1. Crawpress123

    Crawpress123 New Member

    Joined:
    Dec 2020
    Messages:
    3
    Location:
    Montmagny
    Been having a problem in the delivery section air doesnt look stable were the sheet metal.
    Sheets keep scrubing on it and we keep having to wash it eithers wise it gets fastly dirty and sheets come out with marks been trying couple dirrerent ajustements nothing seems to work been wondering if anyone had an advice? thank you (oh and air seems missing at some places)
     
  2. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    348
    Location:
    Côté d'ivoire
    hi sir where in the machine? Please pictures to illustrate your thank you.
     
  3. Crawpress123

    Crawpress123 New Member

    Joined:
    Dec 2020
    Messages:
    3
    Location:
    Montmagny
    sheets keep bouncing and even if i stabilize most postable still gets the sheet metal dirty and finishes on my impression
     

    Attached Files:

  4. Beguin

    Beguin Senior Member

    Joined:
    Jan 2020
    Messages:
    348
    Location:
    Côté d'ivoire
    hello dear sir please, could you explain what the machine suffers, I do not understand anything about your image including the explanations. What is the observation that you made during the production? and that prevents you from working.Thank you very much
     
  5. Crawpress123

    Crawpress123 New Member

    Joined:
    Dec 2020
    Messages:
    3
    Location:
    Montmagny
    so the metal sheet is part of the delivery system they go right up on it before going in the stacker their is air holes in it for the sheet to not scratch the metal sheet air isnt constent which makes the sheet wavy when it passes in the section macking it scratch on the metal sheet causing ink marks on it that then go on ther other sheets scratching on it also scratching my images
     
  6. mrheidelberg

    mrheidelberg Senior Member

    Joined:
    Jan 2008
    Messages:
    761
    Location:
    United Kingdom
    Clean air filters & clean the control that adjust the air to the different areas on the plate just in case something is blocked.
     
  7. asem alsafady

    asem alsafady Senior Member

    Joined:
    Mar 2016
    Messages:
    179
    Location:
    Amman Jordan
    Dear Sir
    You have to pay a great attention to the blasr air at the delivery area.
    Sometimes, too much air cause a high fluctuation in the sheet and make the guide plate dirty.
    Try to use as low air as possible.
    For sure, the sheet decurler is of in this case.
    Good luck.
     
    member 18943 likes this.
  8. member 18943

    member 18943 Previous User

    Joined:
    Nov 2017
    Messages:
    0
    This is a common problem when you have some dead blowers in air star cabinet, please check them all.
     
    asem alsafady likes this.

  9. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Hi,
    I agree with Maher. It's a common issue from that age. One blower stops without any warning error in CP2000. Check whether all blowers are running in AirStar cabinet.
     
    member 18943 likes this.
Loading...