Muller martini machine

Discussion in 'Book Binding' started by Ahmed abo salah, Nov 18, 2020.

  1. Ahmed abo salah

    Ahmed abo salah Member

    Joined:
    Nov 2020
    Messages:
    24
    Location:
    Cairo
    I have a Muller martini machine
    I change the battery then a message appears it called control panel release 1.6 and not make a routine of the progrsme
    What is the problem?
     

    Attached Files:

  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Reset in this way

    Attached is there how to reset the CPU in the motherboard for your console.

    Look the RST (Reset)pin +Grnd)ground) pin, in Google, look for Pins diagrams in according the number of CPU or microprocessor, example attached.

    Previously, test the Vcc(voltage in the Cpu or microprocessor +CLK(clock in MHZ) measure with some DMM , that can measure Frequency.

     

    Attached Files:

    Ahmed abo salah likes this.
  3. Ahmed abo salah

    Ahmed abo salah Member

    Joined:
    Nov 2020
    Messages:
    24
    Location:
    Cairo
    Thank you
    I will do it and make feedback for you
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Ok Sir

    Do it carefully, AND using the most invaluable tipos: "Common Sense".

    Blessing
     
  5. Ahmed abo salah

    Ahmed abo salah Member

    Joined:
    Nov 2020
    Messages:
    24
    Location:
    Cairo
    Mr chock
    My mobile 00201124272228
    Contact whattsup
     
  6. benjib

    benjib Member

    Joined:
    Jul 2019
    Messages:
    15
    Location:
    Romania
    It will not work until you will connect it with the main PLC from the Sitch machine.
    Can you show the labels with the software versions for both Control Panel and PLC ?
     

  7. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Fix it sir?

    Did you do the steps?
     
Loading...