Wohlenberg Stop Signal is too long

Hello
At Wohlenberg Book Binder we have this error The Stop Signal is too Long.
It appears even on power on the machine.
Also the next message is "Maybe one stop actuator is defective"

Any suggestion is welcomed.
Thanks.

 

Hi sir:

Try to exchange one by one, and disconnect the other and see if the Error disappear.

Otherwise, you must replace it.

 

Hello,
Problem solved. Actually one of the stop buttons had bad contacts. The error reffers to the actually stop signal itself that is coming from the stop buttons. A longer time pressed on the stop gives this error. But is not in the manual.

 

Good sir

Blessing