Can I use mouse in cp2000?

Discussion in 'Heidelberg Printing Presses' started by nicolas, Oct 13, 2020.

  1. nicolas

    nicolas Member

    Joined:
    Dec 2017
    Messages:
    7
    Location:
    argentina
    Hi i have a Sm74 cp2000 my touchscreen is descalibrating all time. I calibrate work good but then descalibrate again, I plug a ps2 mouse but I can’t saw the mouse cursor to work in cp2000.
    Someone help me?
     
  2. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    You can use a mouse ofcourse, but it's better to replace the touch screen. What type of IPC is it? Is it MC-0 or MC-2?
     
  3. nicolas

    nicolas Member

    Joined:
    Dec 2017
    Messages:
    7
    Location:
    argentina
    Hi I replace 2 years ago, but now don’t work good, is descalibrating all time. Type MC-C-RO-06
     
  4. Mathew

    Mathew Senior Member

    Joined:
    Apr 2010
    Messages:
    530
    Location:
    Kolding-Denmark
    Hi,
    Connect a PS2 Key board. You need to run Windows task manager by pressing Ctrl+Alt+Del. Then run "explorer". Once you have the access to Windows, then go control panel and find "Elo touch". Over there you can find a check point for mouse and select it. Then you should see the pointer on your screen.

    Good luck,
     
  5. nicolas

    nicolas Member

    Joined:
    Dec 2017
    Messages:
    7
    Location:
    argentina
    Thank you, I did it!. Was difficult to do it without see the cursor. But I could!
     
    awie83 likes this.

  6. awie83

    awie83 New Member

    Joined:
    Jan 2024
    Messages:
    2
    Location:
    malaysia
    Hi mate, can you guide me how to solve this issue.
     
Loading...