Wohlenberg MCS2/3-TV WOHA 5025330 CPU Card OFF-System Behavior

Discussion in 'Cutters and Trimmers' started by Alonex, Oct 10, 2020.

  1. Alonex

    Alonex Senior Member

    Joined:
    Oct 2019
    Messages:
    121
    Location:
    USSR
    Dear Sirs,

    I am interested to know, what massages are generated and displayed on the machine monitor, by the WOHA 5025330 CPU Card, when the system bus (ST4 connector) is disconnected of the rest of the MCS2/3-TV system/machine.

    Please perform such test and provide a picture of the screen, and/or provide such information of your previous experience.

    Thank you,
    Oleg T.
     
    Last edited: Oct 10, 2020
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir

    What do you need to know exactly sir¿

    Shalom
     
  3. Alonex

    Alonex Senior Member

    Joined:
    Oct 2019
    Messages:
    121
    Location:
    USSR
    Dear Chock,

    Again, I need to know, what are a starting logo, and/or error messages on a properly programmed and/or non-programmed WOHA 5025330 CPU Card, when the system bus (ST4 connector) is disconnected of the rest of the MCS2/3-TV system/machine.

    That's all I need to know exactly.

    Thank you,
    Oleg T.
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Sir, thank you by his reply

    But i do not sure, about that, am thinking all depend from the design of Firmware.

    Blessing
     

  5. Alonex

    Alonex Senior Member

    Joined:
    Oct 2019
    Messages:
    121
    Location:
    USSR
    Dear Chock,

    Yes. all this depends of a FW design of the WOHA 5025330 CPU board, and what?
    The CPU board has a predefined behavior, in case of the keyboard and position controllers are not connected.
    What are you not sure?
    You should not be looking for an answer in a Wohlenberg documentation.
    An experiment should be performed on a such machine, in order to be sure .

    Thank you,
    Oleg T.
     
Loading...