Polar Mohr 92 EMC Monitor Display Problems

Discussion in 'Cutters and Trimmers' started by Rony Kumar saha, Jul 26, 2020.

?

How can replace display

  1. How can used New Monitor

    0 vote(s)
    0.0%
  2. How Can you VGA 15 Pin port

    1 vote(s)
    100.0%
Multiple votes are allowed.
  1. Rony Kumar saha

    Rony Kumar saha Member

    Joined:
    Jul 2020
    Messages:
    5
    Location:
    Dhaka, Bangladesh
    Hi Dear
    I am Rony from Bangladesh. I am used Polar Mohr 92 EMC Monitor Cutting Machine 10 year. Now i am face a problems. My machine Monitor Display is not working. Full Display only show light. I am not see nay work this monitor. Now i am change this Display. Please help me how can i change this monitor. Help me

    Thank you
    Rony
     

    Attached Files:

  2. Rony Kumar saha

    Rony Kumar saha Member

    Joined:
    Jul 2020
    Messages:
    5
    Location:
    Dhaka, Bangladesh
    Before may machine Display show.
     

    Attached Files:

  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Dear Sir:

    I can not understand well, what do you mean when you say:

    1) Now i am change this Display

    2)Please help me how can i change this monitor ????.

    3) Please indicate very clean what do you want to do now: a) installing or b) Operating or other??

    Blessing
     
  4. Rony Kumar saha

    Rony Kumar saha Member

    Joined:
    Jul 2020
    Messages:
    5
    Location:
    Dhaka, Bangladesh
    Dear Sir
    My Machine Original Display no work now. So I want this display change. Now i am installing a new Monitor please give me information on how to change it.
     
  5. Rony Kumar saha

    Rony Kumar saha Member

    Joined:
    Jul 2020
    Messages:
    5
    Location:
    Dhaka, Bangladesh
    I am install this type of monitor. How to change it.
     

    Attached Files:

  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:
    You are talking about to installing Lcd vs Crt.

    You must understand , that board CP1+VID +EPROM from Polar , must be compatible with the monitor for LCD, it has the same connector like VGA, HDMI, DVD-1 or D, etc??

    IF Very important that you talk, with the company that did you buy the Monitor LCD?

    I know, other company in Israel, that they fix it, or refurbish the CRT ir B.W or Color ( selling) the email: i.alonex@gmail.com

    and talk with them, in order if you want to buy from them, for to get some assistance, or fix it your Old CRT.

    Blessing
     
  7. rspblake

    rspblake Member

    Joined:
    Dec 2013
    Messages:
    27
    Location:
    london
    We supply replacement led screens for polar and Wohlenberg here in the UK

    Repro-link.com
     

    Attached Files:

  8. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    ok. sir

    Blessing
     
  9. milivoj

    milivoj Member

    Joined:
    Oct 2020
    Messages:
    6
    Location:
    krapina
    Hi,
    You could put plain video monitor...pal or ntsc, there is jumper on video board near bnc connectors.
    I just now put samsung tv :)
    Regards,
    kruno

    edit -eh now i see that it is other model of cutter SORRY

    cut.jpg
     
  10. Alonex

    Alonex Senior Member

    Joined:
    Oct 2019
    Messages:
    121
    Location:
    USSR
    Dear Sirs,

    We offer new 12" CRT Green color monochrome monitors, as direct replacement for the Polar EM/EMC-MON cutters, all over the world.
    As well, new color monitors for this machine with newer FW versions of CPU and VID cards.

    Regards,
    Alonex ICEE Labs
     

    Attached Files:

  11. Rony Kumar saha

    Rony Kumar saha Member

    Joined:
    Jul 2020
    Messages:
    5
    Location:
    Dhaka, Bangladesh
    I am changing my monitor display. Now it's in good service.
     

    Attached Files:

    Diniz_ra likes this.
  12. Nico05

    Nico05 New Member

    Joined:
    Sep 2021
    Messages:
    1
    Location:
    colombia
    Hi, friend The same thing happens to me with my primary monitor. You could teach me or explain to me how you made that change. Please if possible advise me on that change I want to change it for lcd monitor
     
  13. Alonex

    Alonex Senior Member

    Joined:
    Oct 2019
    Messages:
    121
    Location:
    USSR
    Dear Sirs,

    An used but fully refurbished, in excellent condition, original ADT Electronic DCC-121555-03 12" CRT (Cathode Ray Tube) Color Monitor for Polar Mohr 92, 115, 135, 175 EMC/EM-MON Paper Cutters is available for offer all over the world. The original metal cabinet and mounting bracket are available as well. Existing CP1, KC and VID cards revisions should be informed while RFQ, to check for the compatibility.

    20211121_161327-MR.jpg 20211120_121112-M.jpg 20211201_130855-M.jpg 20211201_131018-M.jpg 20211201_131040-M.jpg 20211201_133231-M.jpg

    Of course, a low cost NEW monochrome green 12" CRT monitors are available as well.

    The CRT monitors work properly for decades(!) in mechanical stress industrial and military applications, and not for a few years like LCD monitors with special adapters and often with useless adaptation efforts.

    Thank you,
    Oleg T.
     
  14. Diniz_ra

    Diniz_ra New Member

    Joined:
    Apr 2023
    Messages:
    2
    Location:
    Brasil
    Can you describe how did you perform this change? Do you used any converter or a specific type of monitor?
     
  15. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Normally, if the monitor is coming with the original Polar, only you need to proceed to connect it, according with the schematic wiring diagram electrical.
    They use 220 Vac. Connecting in connector 414: pins1+2+3, coming from the main transformer.

    Let me know ASAP.

    Blessings
     
  16. Diniz_ra

    Diniz_ra New Member

    Joined:
    Apr 2023
    Messages:
    2
    Location:
    Brasil
    Thank you Chock! But my doubt it is how he used the LCD? Did he changed the boards for the compatible ones? Did he use a converter? Special LCD monitor?
     

  17. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    LCD, or more specific: Seven segment display coming from Original Polar is different from Display: LCS or Plasma.

    In that's circumstances, if he did is possible that he changed,

    But I need to know the electronic configuration x to see , what he did.

    Blessings
     
Loading...