Baldwin IVT EPROMS

Discussion in 'Komori Printing Presses' started by benjib, Feb 11, 2020.

  1. benjib

    benjib Member

    Joined:
    Jul 2019
    Messages:
    15
    Location:
    Romania
    Hello, For Komori Lithrone, 1996, we have an issue with Baldwin IVT Dryer.
    Does anyone has the EPROMS saved in a file or could do that? Eprom numbers are:
    IVT H646p.V20 for the Panel
    IVT H646.V25 for the Main Board.

    THank You!
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Normally you can do that
    Since the EPROMS, is burn in factory.

    However,the only way you can do that is you have
    the Software for to burn again the EPROMS.

    I strong recommend you, to get the help directly from Komori Agent in your country.

    Sorry. Blessing.
     
  3. benjib

    benjib Member

    Joined:
    Jul 2019
    Messages:
    15
    Location:
    Romania
    Hello !
    Komori agent has nothing to do with this, since the equipment is Baldwin IVT. Aslo Baldwin was of no help due to old age of the equipment.
    I have everything for reading and burning new eproms, I am electronic engineer myself with 15 years experience.
    I would pay if someone has the same equipment and is able to read the eproms into a file.
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Ok, call to Baldwin, they Will help you
    Let me know.
    Blessing
     
  5. er.bajaj001@gmail.com

    er.bajaj001@gmail.com Member

    Joined:
    Aug 2015
    Messages:
    78
    Location:
    India

    Hey,
    got it?

    No i have a Old IVT Board

    Will check in that.

    Write me
    mbajaj@bajajengg.com
     

  6. benjib

    benjib Member

    Joined:
    Jul 2019
    Messages:
    15
    Location:
    Romania
    Hello
    The customer discarded that repair. Also he is closing that facility.
    Thanks for helping
     
Loading...