SM 102-5+l The pressure drops in the tempering system of the paint device.

Discussion in 'Heidelberg Printing Presses' started by Andrei83, May 30, 2020.

  1. Andrei83

    Andrei83 Member

    Joined:
    May 2017
    Messages:
    60
    Location:
    Russia
    Hello dear specialists. There is a problem on my printing machine equipped with a Thermostating of the inking apparatus. The pressure constantly drops below 1.5 bar. I turn on the water pump and the pressure is back to normal around 1.5-2 bar. But two days later, the pressure is back on zero. Found a minor water leak in the pipe fixed it, but it didn't help. We examined the entire car every inch and there are no water leaks anymore. What should I do? Thanks.
     
  2. SebastianRomanowski

    SebastianRomanowski Member

    Joined:
    Feb 2020
    Messages:
    14
    Location:
    Poland
    Hi, I had a similar problem. After removing the leak, we checked all hose clamps
     
    Andrei83 likes this.
  3. Andrei83

    Andrei83 Member

    Joined:
    May 2017
    Messages:
    60
    Location:
    Russia
    Which part of the car had a leak, which pipes?
     

  4. contractor

    contractor Member

    Joined:
    Oct 2015
    Messages:
    76
    Location:
    australia
    If there are no leaks in the hoses as you say you checked them sometimes it can be the auto air bleeders leaking but more likley it will be the expansion tank has either no or little air in it.
    The air pressure in the tank should be 0.5 bar with no water pressure in the system.
     
Loading...