Main Press Running Detector

Discussion in 'Komori Printing Presses' started by segs, Sep 28, 2018.

  1. Anand5421

    Anand5421 Member

    Joined:
    Mar 2014
    Messages:
    32
    Location:
    india
    D.c voltage should not drop ac bridge rectifier or input ac might be faulty or one of either 3 phase main switch or power input might be faulty chk if either oil motor etc is getting tripped
     
  2. Timson

    Timson New Member

    Joined:
    May 2020
    Messages:
    4
    Location:
    Kazakhstan
    I have a problem with the Komori GS228, it displays the detector error of the working main press when I try to turn it on after "idling". This happens as follows: the idle speed is turned on - then press the speed button 1 time (it sounds and the button blinks when pressed) - then press the speed button a second time, pressing instantly stops, the speed button is constantly on, there is an error in the monitor without indicating the location. The VF64V inverter does not show errors.
     
  3. Timson

    Timson New Member

    Joined:
    May 2020
    Messages:
    4
    Location:
    Kazakhstan
    How did you solve the problem? And what was your problem?
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    What the exactly problem sir

    Let me know, in order to help you

    is the main concerne

    Blessing
     
  5. Timson

    Timson New Member

    Joined:
    May 2020
    Messages:
    4
    Location:
    Kazakhstan
    I have a problem with the Komori GS228, it displays the detector error of the working main press when I try to turn it on after "idling". This happens as follows: the idle speed is turned on - then press the speed button 1 time (it sounds and the button blinks when pressed) - then press the speed button a second time, pressing instantly stops, the speed button is constantly on, there is an error in the monitor without indicating the location. The VF64V inverter does not show errors.
     
  6. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Is a STOP button pressed?
    Check (3-2-1) of the “Machine monitor”.
    If the monitor lamp is lit, release the STOP button for
    the lit location.
    Has a safety bar been activated?
    Check (3-2-2) of the “Machine monitor”.
    If the monitor lamp is lit, return the safety bar for the lit
    location to its original position.
    Is the windup sheet device operating?
    Check (3-2-3) of the “Machine monitor”.
    If the monitor lamp is lit, return the windup sheet device
    to its original position.
    Is a safety cover open?
    Check (3-2-4) of the “Machine monitor”.
    If the monitor lamp is lit, close the safety cover for the
    lit location.
    Is a delivery cover open?
    Check (3-2-5) of the “Machine monitor”.
    If the monitor lamp is lit, close the delivery cover for the
    lit location.
    Is a plate register window open?
    Check (3-2-6) of the “Machine monitor”.
    If the monitor lamp is lit, close the plate register window
    for the lit location.
    Is a footboard open?
    Check (3-2-7) of the “Machine monitor”.
    If the monitor lamp is lit, close the footboard for the lit
    location.
    [Option – Impression cylinder cleaning]
    Is the impression cylinder cleaner unit door open?
    Check (3-2-39) of the “Machine monitor”.
    If the monitor lamp is lit, close the impression cylinder
    cleaner unit door for the lit location.
    Is the feeder door open?
    Check (3-2-8) of the “Machine monitor”. If the monitor lamp is lit, close the feeder door.
    Is the register cover open?
    Check (3-2-9) of the “Machine monitor”. If the monitor lamp is lit, close the register cover.

    Good luck

    Blessing
     

    Attached Files:

  7. Timson

    Timson New Member

    Joined:
    May 2020
    Messages:
    4
    Location:
    Kazakhstan
    Hello! I solved the previous problem. But now another appeared on the inverter VF64V Sref-50, Fjog-50, Rjog - -50. The value of A-01 is 50. The press starts, the idle starts from the first button, the second button must turn on the speed more (about 500 engine revolutions), but the press also spins 50 revolutions per minute. By changing the value, the press either stops starting, or accelerates too quickly and displays an error.
     

  8. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Re-enter parameters in the Inverter

    Blessing
     
Loading...