Heidelberg speed master 52 4 encoder

Discussion in '4-Color Offset Presses +' started by rudysbp, Mar 17, 2020.

  1. rudysbp

    rudysbp Member

    Joined:
    Mar 2019
    Messages:
    10
    Location:
    indonedia
    I hv problem with my machine
    Heidelberg speed master 52 4 2004 cp 104 S.E
    The position of the machine when I want d inching
    Click on the first button to sound the alarm after the second push button alarm sounding only the sound of the brake while the engine does not turn
    The init-test shown
    S-BLT CON 3fde
    And the dyn-test shown
    S-BLT CON 3fdf
    Anyone can help
     
  2. rudysbp

    rudysbp Member

    Joined:
    Mar 2019
    Messages:
    10
    Location:
    indonedia
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    1) Init :the problem is connection cable for encoder stopped rotor position

    2) Dyn : position encoder faulty Rotor.

    Check very well, Good luck

    Blessing.
     
  4. rudysbp

    rudysbp Member

    Joined:
    Mar 2019
    Messages:
    10
    Location:
    indonedia
    The problem is encoder in main motor
    I have bought a new one
    But the encoder in this type need put the serial number to the encoder

    Any one can help the menu in cpc 104 for input the serial nimber of encoder

    Heidelberg speedmastee 52 4 2004 cp 104
     
  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi you must have the operator manual for cpc 104 for inputs.

    and then introduce the s/n of encoder.

    Normally IDS, not need to enter s/n?

    However if need look for the operator m, and go to service display, and then proceed with the steps easy.

    Blessing
     
  6. rudysbp

    rudysbp Member

    Joined:
    Mar 2019
    Messages:
    10
    Location:
    indonedia
    Thanx u mr for the explain the encoder is like this
     

    Attached Files:


  7. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Proceed as i did indicate
    according with his operator m and go to the service display
    Blessing
     
Loading...