Density color change on length of frame

Discussion in 'HP Indigo Digital Presses' started by rolermanto, Feb 11, 2020.

  1. rolermanto

    rolermanto Senior Member

    Joined:
    Dec 2011
    Messages:
    145
    Location:
    italy
    Dear all,
    I have customer that use HPI WS6000, and it’s 1 month that he have problem of color every frame (for sheet user is like every page)
    Print start dark (right) and finish light...
    I attach picture...
    Any suggestions? I tried to change:
    Charge Roller
    Pip Underlayer
    Bid
    Setup of leading edge and tailing edge
    Put “hard” on bid calibration
    Problem not leave the press...
    Luk
     

    Attached Files:

  2. krukov

    krukov Member

    Joined:
    Oct 2019
    Messages:
    76
    Location:
    IDK
    What SW are you using? Remember that when you change option in LE TE correction you need to do FCC. If you are using old SW there was a plugin for that.
     
  3. rolermanto

    rolermanto Senior Member

    Joined:
    Dec 2011
    Messages:
    145
    Location:
    italy
    I'll check this morning, but for sure is old software (Orange screen)
    About the FCC I make all... in the Printcare I can select the hard/soft LE TE...but no change

    Seems that charge on the Pip was not constant...
     

  4. rolermanto

    rolermanto Senior Member

    Joined:
    Dec 2011
    Messages:
    145
    Location:
    italy
    Hi,
    Not sure i need to investigate more... but seems that problem is in the solenoid of charge roller... that non work good...
    I would change the old Charge Roller with New Ceramic Roller... i`m looking for one of it...
     
Loading...