GTO52 2 color Feeder problem

Discussion in 'Heidelberg Printing Presses' started by Abraham Go, Dec 17, 2019.

  1. Abraham Go

    Abraham Go New Member

    Joined:
    Dec 2019
    Messages:
    1
    Location:
    Doha, Qatar
    Hello, can anybody know how to adjust the Swing gripper at the feeder. trouble is Paper tearing at the swing gripper only.
     
  2. junker1984

    junker1984 Senior Member

    Joined:
    Jan 2010
    Messages:
    1,035
    Location:
    US, Midwest
    Likely the set screw in the eccentric adjustment for swing gripper opening cam (release to impression cylinder) has loosened. Much has to be assembled to work on it, but look for 17mm hex, and put spanner on it and lightly try to turn it. If it moves freely, the eccentric may have to be replaced. I may be misunderstanding you, are you saying you see it tears sheet visibly at the feedboard?
     
  3. alibryan

    alibryan Senior Member

    Joined:
    May 2014
    Messages:
    219
    Location:
    Somewhere
    Is the swing gripper simply not opening in some places?
     
Loading...