Help - SM74 feeder timing

We had the timing chain gear break on the feeder on a 2003 SM74 (626-151). We are taking the new shaft and gear to the machine shop to get them drilled for the pins today. Could someone tell me how to get the feeder back in timing? I was thinking that I was told at one time that all the shafts would be pinned in the same position so you could only be 180 off, is that true or is there something other way to time it?

TIA

 

Hello swilson you need to make sure that your feeder is set to right degree for timing should not pln anything permently before! sheets must be fed 4_8mm before headstops you should.get b the specs before hand if you want to run with no problems