Relocating Polar 90

Discussion in 'Cutters and Trimmers' started by Thayanithi Kokulan, Oct 27, 2019.

Tags:
  1. Thayanithi Kokulan

    Thayanithi Kokulan Member

    Joined:
    Dec 2016
    Messages:
    38
    Location:
    Sri Lanka
    At the moment i am having polar 90 at my premise and i am planning to move that to my back side store as the store entrance is small i am unable to move it fully.

    Can any one advice me whether it is possible to move the polar cutter by removing the table, motors, glass and other components of the polar cutter.

    Please refer to the attached images of the polar cutter.
     

    Attached Files:

  2. synthology

    synthology Member

    Joined:
    Apr 2017
    Messages:
    20
    Location:
    us
    yes if you know how to put back
     
  3. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:
    You can moving the polar complete, without touching nothing Only using Forklift and Wood Pallets
    between the Clamp .,use Carefully and slowly.
    Attached is there scheme.how to do it.
     

    Attached Files:

  4. Tomas

    Tomas Member

    Joined:
    Dec 2017
    Messages:
    6
    Location:
    Slovenia
    I have the same problem, moving polar :) Can i grab it under the table in front with pallets on fork lift and jack back of the table on a troley ? And is it enough to be only 10cm from the back
    wall for servising ? Its polar 92 y1999. I will move it only 8 meters on leveled floor.
     

  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:

    You can do the same , attached is there the way , how to do it with carefully

    without touching nothing Only using Forklift and Wood Pallets

    Good luck

    Blessing:)
     

    Attached Files:

Loading...