Hp indigo 5000 ending mark

Discussion in 'HP Indigo Digital Presses' started by Sergio Serge, Oct 3, 2019.

  1. Sergio Serge

    Sergio Serge Member

    Joined:
    Jan 2018
    Messages:
    95
    Location:
    nj
    hello I have problem in quality issue looks like it’s a bump stoping some color to print correctly
    Attached is a pictures showing the problem in the end of paper not gripper side
    I changed impressions paper , pipe and blanket too many times I changed the sponge rollers still have the issue , any idea ??
     

    Attached Files:

  2. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    Could be a PIP underlayment issue.
     
  3. Sergio Serge

    Sergio Serge Member

    Joined:
    Jan 2018
    Messages:
    95
    Location:
    nj
    i changed the underlayer too
     
  4. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    What about the suction cups for the tail of the PIP? Oil teardrops can form if the tail of the pip is being pressed too hard down on the suction cups.
     
  5. Sergio Serge

    Sergio Serge Member

    Joined:
    Jan 2018
    Messages:
    95
    Location:
    nj
    how to fix that ?
     
  6. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    Is the defect exactly the same shape and location after PIP, PIP underlayer and blanket replacements?
     
  7. Sergio Serge

    Sergio Serge Member

    Joined:
    Jan 2018
    Messages:
    95
    Location:
    nj
    yes the same one in the same exact place sometime is smaller sometimes is big like showing in pictures
     
  8. krukov

    krukov Member

    Joined:
    Oct 2019
    Messages:
    76
    Location:
    IDK
    Check ameteks functionality, tubes, CS flow and underlayer.
     
  9. Sergio Serge

    Sergio Serge Member

    Joined:
    Jan 2018
    Messages:
    95
    Location:
    nj
    What is ameteks functionality ?
    underlayer is new cleaning station flow is under the range
     
  10. krukov

    krukov Member

    Joined:
    Oct 2019
    Messages:
    76
    Location:
    IDK
    Ameteks functionality means if they are working or working enough. But for me it still looks like underlayer. Maybe you did something wrong?

    Edit: You can check also separated gray20, check if it's on one color or on one half of PIP. You need to look where it comes from.
     
  11. Sergio Serge

    Sergio Serge Member

    Joined:
    Jan 2018
    Messages:
    95
    Location:
    nj
    it happen when i got the impression paper jam in the blanket ...after that i changed the pipe and blanket and it still show up so i did change the underlayer and pipe still there in the same spot
    i run gray 20 separated it looks in in each impression CMYK i know the pipe run twice the image to transfer it to the blanket i keep running the gray 20 it is in the same spot the trailing edge (the end of the sheet)
    i checked the blanket same spot no air under nit checked the pipe and the underlayer if theres any buble ..nothing
     
  12. FFR428

    FFR428 Senior Member

    Joined:
    Feb 2008
    Messages:
    438
    Location:
    CT
    If this still shows up after pip, blanket and underlay replacement the cylinder itself could be damaged.
     
  13. Sergio Serge

    Sergio Serge Member

    Joined:
    Jan 2018
    Messages:
    95
    Location:
    nj
    i checked both drums blanket and pipe drum no dent no issue at all
     
  14. krukov

    krukov Member

    Joined:
    Oct 2019
    Messages:
    76
    Location:
    IDK
    When you are Printing Gray 20 please change ink order to See if that spot Will change colour. If Yes, propably you have weak spot somewhere, it happens sometimes and check if all drums are synchronized.
     
  15. Chad Thomas

    Chad Thomas New Member

    Joined:
    Dec 2019
    Messages:
    1
    Location:
    usa
    Did you ever resolve this issue?
     
  16. msaddek

    msaddek Member

    Joined:
    Nov 2019
    Messages:
    9
    Location:
    Morroco
    May there is some over imaging oil in PIP or Underlayer
     
  17. Sergio Serge

    Sergio Serge Member

    Joined:
    Jan 2018
    Messages:
    95
    Location:
    nj
    until still have same problems in the same spot more pictures uploaded
     

    Attached Files:

  18. indigo2015

    indigo2015 Member

    Joined:
    Aug 2015
    Messages:
    60
    Location:
    rome (Italy)
    I think you need to replace itm Drum.
     
  19. krukov

    krukov Member

    Joined:
    Oct 2019
    Messages:
    76
    Location:
    IDK
    If it would be ITM drum issue would be visible on every separation, not every two. If its Old Press can be weak spot on PIP drum. First do the baseline, take out PIP and underlayer and check drum by fingers.
     

  20. indigo2015

    indigo2015 Member

    Joined:
    Aug 2015
    Messages:
    60
    Location:
    rome (Italy)
    In the photo where you see only magenta at the bottom. You shoul have ymck as is grey. But you only have 1 color and not 2 as you say. Also this problems on the trailing edge normaly are because of itm Drum.
     
Loading...