Polar 92 ED erorr 140

Dear all
Good day. My polar 92ed soft starter kimodul was damaged but emergency I like use the machine with a DOL motor starter. When I started the motor I getting a new error Locking valve 25V faulty (140).
Is there any wrong in this manner?
Please help us.

Regards
Kulasekar

 

Indicates that input signal "locking valve 25V" to board CPxx has not been set, i.e. the 25-V voltage supply of locking valve Y315 must be verified.

 

Thank you for the reply Mr. Chock I found the problem the F4 Bridge leg was little burnt hopefully the problem is in control.
Thanking you.
Kulasekar

 

Great Sir!